where is the cheapest place to get wheel bearings for my 94 4x4 super cab with the dana 35? i looked on rock auto but they got so many variations i got no idea what to get.

 

if you got the spicer or timken number that would be even better. thanks

 

you realize there is the outer wheel bearings there is 2 of those. that would be Timken

then there is an inner axle bearing thats a needle bearing, you will need all the seals also. then there is the spicer axle u-joints.. there is TONS of crap you need for the front end of D35.. sadly i have all of it in my room but my now i get to see if i can fix the frame

 

yea i seen there is inner and outer bearings, i checked my joints, they were good, can you tell me the timken numbers off the bearings when you get a chance please, and a seal number if there is one.i deal with a bearing supplier but he dont look them up by application.

 

Redneckstone is also saying there are needle bearings inside the spindle along with the inner and outer wheel bearings that should be replaced.
Total = 6 bearings to change.

 

really? i didnt know about them, i have to get a break down and take a look thanks

 

They will be inside the spindle right where it bolts to the steering knuckle.They support the stub shaft on the end of the axle shaft.

 

i think i need them too because my stub shaft has play in it where it goes into the spindle, would that cause my hubs to slip when wheeling?