Are Timkens really the only ones worth buying?
#1
Are Timkens really the only ones worth buying?
so i need to buy new wheel bearings.....the timkens are a lot more that cheap ones you can buy....and the timkens only have a 1 year warranty......what do you guys think about these ones.....im even thinking about just sending mine in and getting another one of the ones i just broke.....what do you think?
Ford Ranger 4x4 w/Rear Whl ABS Frt Hub & Brg at 1AAuto.com.
Ford Ranger 4x4 w/Rear Whl ABS Frt Hub & Brg at 1AAuto.com.
#4
ya i know they will last longer.....but i beat the **** out of mine...with going in mud and deep water ect, and having 2 inch wheel spacers and every thing else.....its like even tho they are timken they will most likely fail over time....and if it is more than a year then im out another 370 bucks.....and if i get cheap lifetime warranty ones then i might have to replace hem every 6 months....but it only costs me like $20 in shipping each time.....so in reality i would have to send in my lifetime warranty ones about 10-12 times to justify buying the timken ones.....and at a rate of 2 sets a year....thats like 5 years worth of wheel bearing before it would be cheaper to buy the timkin ones....and that is only if they last more that 5 years.....plus im thinking i should be SAS"d in less than 5 years......but is 300 bucks worth putting my life in danger if another ones falls apart like my last one....if that happened in a worse place i could have easily died....idk what to do.....
#5
#7
well i just spend 352.22 on timkens from rockauto....sweet...and i like the wheel spacers.....plus i dont get whats the difference between 15x10's with 4 inch backspace (6 inches sticking out off the hub) and having 15x8's with 4 inch BS and 2 inch wheel spacers (6 inches off the hub)....
#8
#10
word to the wise: jumping your truck can take out brand new OEM Timken's....I know from experience. LOL.
#11
#12
I found out very recently that I needed new bearings in my truck. This was shortly after reading about yours and someone else on RF's breaking and you guys messing up your trucks. Reading that alone makes me think it's worth spending the extra coin on the better quality part. I couldn't imagine how I would feel about it if that had happened to me.
#13
#14
Thread
Thread Starter
Forum
Replies
Last Post
GuyBehindAComputer
2.9L & 3.0L V6 Tech
3
07-24-2013 07:42 PM
quicksilver2001
General Technical & Electrical
18
01-29-2006 01:23 PM
serialkiller
General Technical & Electrical
2
06-01-2004 10:27 AM