4bt cummins swap
#1
4bt cummins swap
so ive been searching around about the 4bt swap and i cant find a how to or walk through to look at. i have a 2002 fx4 with a 4 inch suspension lift right now and plan on getting a 3 inch body lift this winter. if anyone finds a walkthrough please send me the link. does anyone know what the supply list would be to do the swap? transmission, transfercase, ect. thanks!
#2
#4
I've been looking into this too. Its not a real difficult swap in to any vehicle. The motor is essentially a 6bt (5.9) with 2 fewer cylinders. You can use just about every part manufactured for the 6 cylinder on the 4 cylinder. I believe The only custom work you would need to do it engine and transmission mounts, and maybe a driveshaft. Well, besides all of the obvious diesel conversion things (fuel system, gauges, etc) Otherwise, its a pretty straight forward swap. There aren't really any walkthroughs though because not too many have been swapped into rangers. You can get a ton of help on getting the thing running in your truck, but the actual mounting of the motor, trans, etc is going to be up to you.
Good luck.
Good luck.
#7
Here are links to several builds:
Mooktank's 4BT Ford Ranger...
93 ranger 4bt build
93 ranger p-pump 4BT swap <= 93 Ranger p-pump 4BT swap
The third one is mine. :)
If you're seriously considering a 4bt for yur ranger, I would recommend a lot of your time looking on the 4btswaps site.
Mooktank's 4BT Ford Ranger...
93 ranger 4bt build
93 ranger p-pump 4BT swap <= 93 Ranger p-pump 4BT swap
The third one is mine. :)
If you're seriously considering a 4bt for yur ranger, I would recommend a lot of your time looking on the 4btswaps site.
#8
Thread
Thread Starter
Forum
Replies
Last Post
HempRanger
General Technical & Electrical
12
06-09-2010 09:16 AM
rolsmojave3
General Ford Ranger Discussion
25
07-12-2008 09:46 PM