i need gear help
#1
i need gear help
i have a 96 ranger 2 wheel drive. this is stricktly a bog truck. the front is still at stock height, but the rear is on a set of 37s. i getting tired of boiling the clutch trying top take off. one it grabs it spins all day long but the take off is killing me. i need help with finding a set of gears to put in the rear axle. im thinking of a set of 4.56s but i dont know, please help
#2
Do you know what your stock ratio is? If not look on the drivers door sticker where it says "AXL" or "AXLE". Post that information up and then I can better tell you want gearing to get.
I would recommend 4.88 gears for 37's. Depending on what your engine size is, I could also say 5.13 gears.
I would recommend 4.88 gears for 37's. Depending on what your engine size is, I could also say 5.13 gears.
#5
#6
#7
Going by your user name, I would say you have a 4.0 in your Ranger. If you do, then you have the 8.8 rear end and 5.13 is the lowest gearing you can get.
BTW Trent, the 5.13's are not offered in the front of the '98+ Ranger; 4.88 is the lowest for the front of '98+ Rangers.
BTW Trent, the 5.13's are not offered in the front of the '98+ Ranger; 4.88 is the lowest for the front of '98+ Rangers.
#13
Thread
Thread Starter
Forum
Replies
Last Post
CapeFear562
Drivetrain Tech
5
01-28-2009 08:45 AM
05edge
General Technical & Electrical
26
05-07-2008 07:39 PM