02 Clutch problem? Help me plea
#1
Join Date: Jan 2008
Location: spindale, NC
Posts: 1,444
Likes: 0
Received 0 Likes
on
0 Posts
02 Clutch problem? Help me plea
Well I had a clutch replaced a few months ago. They resurfaced the pressure plate, installed a Luk clutch, bearings, and new slave..
Well yesterday I noticed my clutch has like 3" of play before disengaging...It disengages right at the floorboard..I dont know what the problem is..I have plenty of fluid and no leaks
Now, i also noticed, in neutral, i can shift into every gear without disengaging the clutch, is that a problem or normal for a ranger?
Well yesterday I noticed my clutch has like 3" of play before disengaging...It disengages right at the floorboard..I dont know what the problem is..I have plenty of fluid and no leaks
Now, i also noticed, in neutral, i can shift into every gear without disengaging the clutch, is that a problem or normal for a ranger?
Last edited by ranger_1999; 02-06-2011 at 06:32 PM.
#2
I'm sorry, your description is very hard to understand. I think you may not understand what engaging the clutch is. You disengage the clutch to put it in gear or shift. You engage the clutch when it is in gear to make the vehicle move. If that is not clear, the clutch is disengaged when you push it in and engaged when you let it out.
Last edited by IN2 FX4; 02-04-2011 at 10:03 AM.
Thread
Thread Starter
Forum
Replies
Last Post
ttb_addict94
Drivetrain Tech
0
06-05-2014 05:43 PM
DJDev
Drivetrain Tech
2
10-28-2012 08:41 PM
DangerRangerGirl86
SOHC - 2.3L & 2.5L Lima Engines
7
06-06-2011 09:00 AM