no 4wd need help now
#1
no 4wd need help now
ok, so something is seriously wrong with my 4wd system. i turn the switch **** and absolutely nothing happens at all. so i dont know if its the switch or the motor yet. but it just dumped tons of snow in denver last night and im screwed. my trucks a freakin' moron in 2wd. im getting pasted by freakin '90 hondas and crap. is there anyway to manually shift my t case right now?
#6
PVS is the Pulse Vaccuum System. When you engage your 4wd, the transfer case engages and also it activates a vaccuum pulse to the front hubs, which locks them. This system is known to fail, and in my opinion is not reliable. There is a way to keep those hubs constantly locked, like the current rangers are, so all that happens when you engage your 4wd is your transfer case engages and you are good to go. Let me dig up the how to and ill post the link. See if it work for you, if not we'll work from there.
#7
https://www.ranger-forums.com/forum2...ead.php?t=9211
EDIT:Yea I did jump ahead a bit, does your 4wd light come on when you engage it or no? If not, start with the fuses.
Try that. Let us know
EDIT:Yea I did jump ahead a bit, does your 4wd light come on when you engage it or no? If not, start with the fuses.
Try that. Let us know
Last edited by Kosmo04; 12-01-2006 at 02:31 PM.
#8
I agree, make sure it isn't a PVH failure. You have to start your troubleshooting there with a '99. In cases of PVH failure, the transfer case and everything else works as it should - it's the hublocks out at the wheel ends that aren't engaging.
Often times a problem in the 4WD circuitry will cause the 4WD instrument panel lights to blink, are yours doing that?
Does the 4WD HIGH light come on when you switch into that mode?
Often times a problem in the 4WD circuitry will cause the 4WD instrument panel lights to blink, are yours doing that?
Does the 4WD HIGH light come on when you switch into that mode?
#9
mine goes into 4 wheel good, then out of the blue , it goes out , i dont hear any thing at all when it does this, i tired the pvs clip removal thing and i will try it out soon to see if its working, after that i dont know what i am going to do? any ideas
ps i have a 99 ranger 4x4 xlt , x-cab and a small lift
ps i have a 99 ranger 4x4 xlt , x-cab and a small lift
#10
Originally Posted by claytonrduvall
mine goes into 4 wheel good, then out of the blue , it goes out , i dont hear any thing at all when it does this, i tired the pvs clip removal thing and i will try it out soon to see if its working, after that i dont know what i am going to do? any ideas
ps i have a 99 ranger 4x4 xlt , x-cab and a small lift
ps i have a 99 ranger 4x4 xlt , x-cab and a small lift
https://www.ranger-forums.com/forum2...ad.php?t=24211
#11
#12
well idid the mod and did not have enought time to go and test it out , due to work , but i did play in the yard a bit , unable to get on it , wfie get mad if i mess the yard up, but i will try this weekend and when playing in the yrad it felt better , so im hoping,. let ya know , thanks again
Thread
Thread Starter
Forum
Replies
Last Post
wvcat
General Ford Ranger Discussion
14
02-26-2023 05:26 PM
bleech1
General Technical & Electrical
11
11-14-2019 09:38 AM
rngprerunner
General Technical & Electrical
19
06-04-2009 08:56 PM