rear axle and bearing clearance?
#1
#3
#4
Old Guy User…
iTrader: (12)
Ok.
The bearing is a press fit so it needs to be tight.
Chances are the bearing may have some movement not the bearing to axle.
If you on are concerned about the bearing fitting the axle, pull the axle and see if it moves on the axle shaft.
There will be a slight movement up and down.
Sorry I can't give you a specification on it, it is a feel to me not a measurement.
The bearing is a press fit so it needs to be tight.
Chances are the bearing may have some movement not the bearing to axle.
If you on are concerned about the bearing fitting the axle, pull the axle and see if it moves on the axle shaft.
There will be a slight movement up and down.
Sorry I can't give you a specification on it, it is a feel to me not a measurement.
Thread
Thread Starter
Forum
Replies
Last Post
jpsaxnc
General Ford Ranger Discussion
4
06-05-2014 09:04 PM