Drivetrain Tech General discussion of drivetrain for the Ford Ranger.

Rear end went out!!!

Thread Tools
 
Search this Thread
 
  #1  
Old 11-29-2008
JakeH05's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jan 2008
Location: Elberton, GA
Posts: 695
Likes: 0
Received 0 Likes on 0 Posts
Rear end went out!!!

Had a bad day! My rear end blew up and blew a hole in the rear removable casing. I believe the torsen limited slip might have grenaded and took the pinion gears and spider gears with it. I dont know for sure. I will have 2 pull the casing and see tomorrow when i get it back to the house. Its sux tho. Any idea how much $ im looking at assuming the axle itself is alright or if its not ok and i dont fix it myself.
 

Last edited by JakeH05; 11-29-2008 at 11:17 PM.
  #2  
Old 11-29-2008
04blackedge's Avatar
RF Veteran
iTrader: (13)
Join Date: Jan 2007
Location: Durham, NC
Posts: 23,426
Likes: 0
Received 6 Likes on 6 Posts
The same thing happened to Chuck, thesoundmaster
 
  #3  
Old 11-29-2008
whippersnapper02's Avatar
RF Veteran
iTrader: (1)
Join Date: Sep 2006
Location: Earth, Milky Way Galaxy
Posts: 7,415
Likes: 0
Received 3 Likes on 3 Posts
The early Torsens were a problem.
 
  #4  
Old 11-29-2008
jaycheetwood's Avatar
Member
Join Date: Sep 2008
Location: Ogden, Utah
Posts: 2,218
Likes: 0
Received 0 Likes on 0 Posts
hmm what were you doing when this happened?
 
  #5  
Old 11-29-2008
JakeH05's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jan 2008
Location: Elberton, GA
Posts: 695
Likes: 0
Received 0 Likes on 0 Posts
just leaving a parking lot and boom it went on me. It was gonna go sooner or later i guess. Im glad it was in a parking lot and not on the open road or a trail somewhere.
 
  #6  
Old 11-29-2008
jaycheetwood's Avatar
Member
Join Date: Sep 2008
Location: Ogden, Utah
Posts: 2,218
Likes: 0
Received 0 Likes on 0 Posts
wow that sucks.. i have done my entire rear ends bearings and drive shaft. its pricy stuff..
 
  #7  
Old 11-29-2008
Shaklakan's Avatar
Member
Join Date: Jan 2008
Location: La Habra CA
Posts: 1,100
Likes: 0
Received 0 Likes on 0 Posts
Yah if your not doing it yourself it could be very expensive.
 
  #8  
Old 11-30-2008
TheStig88's Avatar
Member
iTrader: (4)
Join Date: Aug 2008
Location: Columbia, Missouri
Posts: 2,120
Likes: 0
Received 4 Likes on 2 Posts
Craigslist.....
 
  #9  
Old 11-30-2008
99ranger4x4's Avatar
RF Veteran
iTrader: (3)
Join Date: Jun 2006
Location: Austin, TX
Posts: 12,198
Likes: 0
Received 3 Likes on 3 Posts
ouch!

yea it can get very pricey if you don't know people. I'm guessing most shops will probably charge you to replace the ring and pinion also even if they're not damaged.
 
  #10  
Old 11-30-2008
Fx4wannabe01's Avatar
RF Veteran
iTrader: (23)
Join Date: May 2005
Location: Boring, Oregon
Posts: 21,721
Likes: 0
Received 10 Likes on 10 Posts
'02 torsen. that sucks. it happens with those first runs.

i happen to know a guy who was unable to use his 39,000mile torsen from his '05L2 axle when he installed 4.88's...wonder who that is......??

me!
 
  #11  
Old 11-30-2008
Ace's Avatar
Ace
Ace is offline
Member
iTrader: (4)
Join Date: Aug 2007
Location: Central, Illinois
Posts: 3,450
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Fx4wannabe01
'02 torsen. that sucks. it happens with those first runs.

i happen to know a guy who was unable to use his 39,000mile torsen from his '05L2 axle when he installed 4.88's...wonder who that is......??

me!
now you have me worried lol i have an 02
 
  #12  
Old 11-30-2008
Fx4wannabe01's Avatar
RF Veteran
iTrader: (23)
Join Date: May 2005
Location: Boring, Oregon
Posts: 21,721
Likes: 0
Received 10 Likes on 10 Posts
Pop that cover off and show us what happend. pic ***** the carnage!!




Cost wise:

4.11:1 Yukon gears from complete off road: $229 w/ master install kit
http://completeoffroad.com/i-123352-...kage-deal.html

Limited slip unit: you have a few options....ford racing trac-loc(like what chuck replaced his torsen with), throw an open carrier from a F150/Bronco then put in a lock-right or aussie....your options here are somewhat endless...just depends on your cashflow and what you want out of the truck. No matter how you look at it..you will be paying for a Ring and Pinion install/setup as the carrier is definately being replaced.

Here's some options...

Open carrier: $99(add more for spiders and side gears and thrust washers and crosspin) http://completeoffroad.com/i-123370-...31-spline.html

If open carrier is installed:
LockRight $299 http://completeoffroad.com/i-123385-...-78-x-pin.html

Lockers..
Detroit $579 http://completeoffroad.com/i-122884-...187c-145a.html
Eaton E-Locker $739 http://completeoffroad.com/i-123128-...-eat19660.html

If you want a limited slip unit...
Trac-Loc $249 http://completeoffroad.com/i-129821-...31-spline.html
Detrout True Trac(VERY VERY similar in design to the Torsen) $449 http://completeoffroad.com/i-123637-...31-spline.html
 
  #13  
Old 11-30-2008
Fx4wannabe01's Avatar
RF Veteran
iTrader: (23)
Join Date: May 2005
Location: Boring, Oregon
Posts: 21,721
Likes: 0
Received 10 Likes on 10 Posts
Originally Posted by Ace
now you have me worried lol i have an 02
you don't have a torsen limited slip do you? unless you swapped to an '02 L2 31spline axle, you have nothing to worry about.
 
  #14  
Old 11-30-2008
Ace's Avatar
Ace
Ace is offline
Member
iTrader: (4)
Join Date: Aug 2007
Location: Central, Illinois
Posts: 3,450
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Fx4wannabe01
you don't have a torsen limited slip do you? unless you swapped to an '02 L2 31spline axle, you have nothing to worry about.
ok cool
 
  #15  
Old 11-30-2008
JakeH05's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jan 2008
Location: Elberton, GA
Posts: 695
Likes: 0
Received 0 Likes on 0 Posts
I believe i might go back with another torsen or try to find a 8.8 from a junkyard.

Other than now, I have had great success with the torsen. It hooks up very well offroad and on wet pavement.

I will try to get pics up later.
 
  #16  
Old 11-30-2008
4LO 4.0's Avatar
Member
iTrader: (5)
Join Date: Jun 2007
Location: Grovetown, Ga
Posts: 650
Likes: 0
Received 0 Likes on 0 Posts
I would just get an 8.8 out the junkyard, there are litterally hundreds of them around here, and you can get them for $200. the biggest problem will be finding one that matches you gear ratio.
 
  #17  
Old 11-30-2008
HighRollerII's Avatar
RF Veteran
iTrader: (4)
Join Date: Jun 2004
Location: Charleston, SC
Posts: 10,073
Likes: 0
Received 4 Likes on 4 Posts
ive got a stock 8.8 from my edge its open diff needs a speed sensor -- i need it gone so ill sell it cheap and your only over in GA
 
  #18  
Old 11-30-2008
Fx4wannabe01's Avatar
RF Veteran
iTrader: (23)
Join Date: May 2005
Location: Boring, Oregon
Posts: 21,721
Likes: 0
Received 10 Likes on 10 Posts
one thing to remember here jake...you've got a 31spline 8.8 in your Fx4, where as the rest of us have puny 28spliners......meaning...your axle is signficantly stronger than the average ranger.
 
  #19  
Old 11-30-2008
Join Date: Dec 2007
Location: Albuquerque, NM
Posts: 324
Likes: 0
Received 0 Likes on 0 Posts
If you can afford the truck being down for a little bit this would be a good time to do an explorer diff swap. The only thing you are going to gain since you already have the FX4 is disc brakes. It still has 31 spline axles, and you can get it with a limited slip and different gear ratios. There will be some work involved for the spring pads and shock mounts. Just another option for ya.

I have a brand new 28 spline trac loc and ford racing master gear install kit I'll sell cheap if you end up with a 28 spline rear.

Good luck!
 
  #20  
Old 11-30-2008
kyle12201's Avatar
Member
Join Date: Apr 2008
Location: East Waterboro, ME
Posts: 1,543
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Ace
now you have me worried lol i have an 02
same lol damn... sucks man hope it doesn't happen to me
 
  #21  
Old 11-30-2008
jrpro130's Avatar
RF Veteran
iTrader: (1)
Join Date: Sep 2005
Location: Florida
Posts: 5,057
Likes: 0
Received 1 Like on 1 Post
Explorer Swap?
 
  #22  
Old 11-30-2008
mudranger96's Avatar
Member
Join Date: Oct 2005
Location: Lehigh Acres, FL
Posts: 2,549
Likes: 0
Received 1 Like on 1 Post
I would check with ford i think they did a recall on 02 FX4 model rear ends

Here is a link(http://www.ford-trucks.com/recalls/r.../y-2002/t-4302). I have been debating on taking mine in to see if they will do mine before it goes out and leaves me stranded
 
  #23  
Old 11-30-2008
wolfman00's Avatar
Member
Join Date: Jul 2007
Location: annapolis, md
Posts: 351
Likes: 0
Received 0 Likes on 0 Posts
call up ford. there was a recall on the 02 torsen axle. they were replacing them free of charge.
 
  #24  
Old 11-30-2008
JakeH05's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jan 2008
Location: Elberton, GA
Posts: 695
Likes: 0
Received 0 Likes on 0 Posts
I wonder if they will tho because i have 75k miles and im the second owner of the truck and its not under warranty.
 
  #25  
Old 11-30-2008
99ranger4x4's Avatar
RF Veteran
iTrader: (3)
Join Date: Jun 2006
Location: Austin, TX
Posts: 12,198
Likes: 0
Received 3 Likes on 3 Posts
Originally Posted by wolfman00
call up ford. there was a recall on the 02 torsen axle. they were replacing them free of charge.
only on manuals, that's the issue Chuck has when his blew up.
 


Quick Reply: Rear end went out!!!



All times are GMT -6. The time now is 02:46 AM.