Brakes.......HELP
#1
Brakes.......HELP
so i replaced the pads today and per usual i ****ed up....i hit the pedal to test the driverside and forgot the passenger side was undone and knocked out the cylinder thing...well i got it back in and filled the fluid back up and finished the brake job and i have very minimal brakes and the pedal goes to the floor..........help the retard out.....thanks
#2
#4
yeah... you need to bleed your brakes. if you look on your fron't calipers, there's a little bolt with a hole in it on the back side. basically you need to depress the pedal, loosen the bolt till some fluid drains out, tighten the bolt back up, and then take your foot off the brake pedal. repeat a few times on each side and that should get any air out of the system that you might have sucked in when the piston fell out.
Thread
Thread Starter
Forum
Replies
Last Post
VulcanMotor~PowerHouse
General Ford Ranger Discussion
23
09-30-2005 10:40 AM