tranny swap?
hey folks i'm new to the forum and i was wandering if i could get some advice on a project i'm thinking of starting. i have a 99 ford ranger 2.5 4 cyl. and a 97 ford ranger 3.0 v-6 my question is can i swap the tranny from the v-6 to the 99 with the four cylinder? will the bell housings interchange or what would i need to do? thanks for any help you give.
|
no......because the bell housing is different
|
and the bellhousings are not unboltable off the case. so...SOL.
|
if its a automatic then yes. if its a manual then no.
if its a auto and there both the same trans, 4R44E then yes all you have to do is swap the bellhousing/pump assmy from one to the other |
Originally Posted by Fx4wannabe01
and the bellhousings are not unboltable off the case. so...SOL.
|
Originally Posted by 04 EDGE
if its a automatic then yes. if its a manual then no.
if its a auto and there both the same trans, 4R44E then yes all you have to do is swap the bellhousing/pump assmy from one to the other |
All times are GMT -6. The time now is 02:18 PM. |
© 2024 MH Sub I, LLC dba Internet Brands