Ranger-Forums - The Ultimate Ford Ranger Resource

Ranger-Forums - The Ultimate Ford Ranger Resource (https://www.ranger-forums.com/)
-   Drivetrain Tech (https://www.ranger-forums.com/drivetrain-tech-37/)
-   -   What front end do I have?? (https://www.ranger-forums.com/drivetrain-tech-37/what-front-end-do-i-have-62027/)

kawski650sx 04-06-2008 06:28 AM

What front end do I have??
 
I am in the process of rebuilding my truck and I need to install new front wheel bearings now. I have a 90 ranger 4.0 liter supercab with an 8.8 and 3.73 gears. I think I have the Dana 28 but cant remember as its been a few years since my last rebuild. Can anybody help me confirm so I can get the proper rotors and bvearings on the first trip to the parts store. Thank You for time spent helping. I await your replies as I am gettin ready to go to the Autozone to get some stuff. I am gonna make some coffe and will check back shortly.

buckgnarly 04-06-2008 07:08 AM

http://www.therangerstation.com/tech...ont_Axles.html

Looks like easiest thing is the bolt pattern on the front of the diff. 28 has 12 bolts, 35 has 10.

kawski650sx 04-06-2008 07:18 AM

Thanks Carl!
 
Thank You I appreciate the help.

Redneckstone 04-06-2008 08:14 AM

do all the wheel bearings and might as well do the axle u-joints. its gonna run you just under $500 for all the bearings and seals, u-joints, balljoints.

I know i just had to buy it all LOL.. if you have any questions taking things apart let me know lol..

kawski650sx 04-06-2008 07:34 PM

yup
 
Well I have gone through this truck 2 times previously so the U joints,and ball joints are all staying as they were replaced with greaseable units.The bearings however I never chance as I had one blow out with 9k miles on it,so I replace them quite frequently now. Maybe it was that jump that bent my shock bolts?? :puppy_dog So I think I will be Ok on the rebuild. I am pretty sure I remember how to do it all. Thanks for the help. Today I degreased the engine bay and repainted engine compartment,and installed a new wiring harness that has a relay for my new 100 watt lights. Tuesday I am gonna tear down the front end and install new rotors / bearings/ grease all of the u joints and change the front diff fluid. :party:


All times are GMT -6. The time now is 02:17 AM.