Engine & Drivetrain Ford Ranger engine and drivetrain parts, i.e. radiators, driveshafts, knuckles, brakes.

For Sale: 3.0 upper intake manifold - SC

  #1  
Old 10-13-2011
zak873's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jul 2010
Location: southcarolina
Posts: 1,108
3.0 upper intake manifold - SC

came off a 2003 3.0 with 48k. its a little dusty, and has some cobwebs, but otherwise its in great shape. - $60 picked up. will ship on your dime. located in spartanburg, south carolina.

 
Attached Thumbnails 3.0 upper intake manifold - SC-2011-10-13_11-17-28_185.jpg  
  #2  
Old 10-26-2011
zak873's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jul 2010
Location: southcarolina
Posts: 1,108
TTT, need this stuff gone to fund a future project!
 
  #3  
Old 11-07-2011
zak873's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jul 2010
Location: southcarolina
Posts: 1,108
price is obo.
 
  #4  
Old 11-11-2011
Member
iTrader: (2)
Join Date: Mar 2011
Location: Bloomington, MN
Posts: 209
Do you have the coil bracket off the 3.0? Intake tube as well?
 
  #5  
Old 11-11-2011
zak873's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jul 2010
Location: southcarolina
Posts: 1,108
what coil bracket? and no, I don't have an intake tube for a 3.0.
 
  #6  
Old 11-11-2011
Member
iTrader: (2)
Join Date: Mar 2011
Location: Bloomington, MN
Posts: 209
The bracket that the coil pack bolts to. It's different on 01-up trucks and I need one for the composite upper intake swap.
 
  #7  
Old 11-11-2011
zak873's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jul 2010
Location: southcarolina
Posts: 1,108
I dont think so. I'll check tomorrow if I remember. I might have tossed it in the trash when I swapped engines, or used it. I don't remember.
 
  #8  
Old 11-18-2011
zak873's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Jul 2010
Location: southcarolina
Posts: 1,108
TTT, lowball me, idc.
 
  #9  
Old 12-07-2011
Kris03's Avatar
Member
Join Date: Jun 2011
Location: glastonbury, ct
Posts: 1,236
do yoiu know how difficult it is to swap this onto a 99 with the aluminum upper mani? id be interested
 
  #10  
Old 12-07-2011
Member
iTrader: (2)
Join Date: Mar 2011
Location: Bloomington, MN
Posts: 209
Upper intake, TB, intake tube, coil mount bracket, and vacuum hoses are needed for the swap. EGR and the coolant lines would be deleted with the swap.
 
  #11  
Old 12-07-2011
Kris03's Avatar
Member
Join Date: Jun 2011
Location: glastonbury, ct
Posts: 1,236
the reason to do this is so i can mount a larger throttle body so thatll work nice. i would need to delete the egr and coolant lines? and the vacuum hoses from my current intake dont plug in to this one?
 
  #12  
Old 12-07-2011
Member
iTrader: (2)
Join Date: Mar 2011
Location: Bloomington, MN
Posts: 209
There isn't a bung or mounting area on the intake for an EGR valve, nor are there any coolant lines. Some of the vacuum lines look like they will work fine, however there are 2 that are very different.
 
  #13  
Old 12-07-2011
Kris03's Avatar
Member
Join Date: Jun 2011
Location: glastonbury, ct
Posts: 1,236
someone shoudl make a how-to. i have yet to find one. so with mine you just plug up the coolant lines and egr valve and get soem vacuum lines from a 2002 and newer?
 
  #14  
Old 12-07-2011
Member
iTrader: (2)
Join Date: Mar 2011
Location: Bloomington, MN
Posts: 209
Basically yes. If you use an Escape TB the stock intake tube should work, one less item to worry about.

I haven't done the swap yet, need an intake tube (I'm using a stock 03' Ranger TB) and coil bracket. Once I score the items I'll need, I'll do a how-to.
 
  #15  
Old 12-07-2011
Kris03's Avatar
Member
Join Date: Jun 2011
Location: glastonbury, ct
Posts: 1,236
yes definitely doo, ive read you can do the escape one as long as you have a composite manifold or a 56mm bbk one. im trying to see if one from a v6 mustang will work with my manifold. i just want a slightly larger one. but problem is the IAC is on the TB and not the manif like in pretty much all the pictures ive seen.
 
  #16  
Old 12-07-2011
Member
iTrader: (2)
Join Date: Mar 2011
Location: Bloomington, MN
Posts: 209
The IAC bolts directly to the composite intake, on our trucks it bolts directly to the TB. With some fab work, the Gen 3 Taurus Duratec TB supposedly will work, but the Escape TB is a more common well documented swap. The IAC tunnel on the Taurus lines up better than the Escape, the throttle linkage is entirely different--hence the fab work on the Duratec TB.
 
  #17  
Old 12-07-2011
Kris03's Avatar
Member
Join Date: Jun 2011
Location: glastonbury, ct
Posts: 1,236
ill check out some more escape throttle bodies, the ones i find look like they have hose connections. the bbk one is the closest i have found thats a 250 bill.
 

Last edited by Kris03; 12-07-2011 at 08:39 PM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
smash_lizard
2.9L & 3.0L V6 Tech
5
05-27-2012 12:53 PM
fordboston
4.0L OHV & SOHC V6 Tech
6
01-25-2010 09:37 PM
bamabacker
2.3L & 2.5L I4 Tech
3
09-13-2008 06:37 PM
raggedranger
2.3L & 2.5L I4 Tech
4
09-09-2008 02:16 PM
Hail_dent
2.9L & 3.0L V6 Tech
1
02-02-2008 04:30 PM


Thread Tools
Search this Thread
Quick Reply: For Sale: 3.0 upper intake manifold - SC


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.