For Sale: 98-00 exhaust parts, intake, seats, bed cap, 3.0L extended cab - NY - Ranger-Forums - The Ultimate Ford Ranger Resource


Engine & Drivetrain Ford Ranger engine and drivetrain parts, i.e. radiators, driveshafts, knuckles, brakes.

Closed Thread
 
LinkBack Thread Tools Search this Thread
  #1  
Old 05-05-2010
Member
Thread Starter
 
Join Date: Jun 2006
Location: Angola NY
Posts: 162
98-00 exhaust parts, intake, seats, bed cap, 3.0L extended cab - NY

Complete intake: K&N FIPK gen II with Jet MAF sensor-$300
Exhaust: Magnaflow Y-pipe, Magnaflow cat fitted for a 3" inlet muffler-$400
Front bench seat 60/40 non smoker truck, one small tear 1/2 inch near driver right leg very clean, glovebox top cracked slightly as usual-$150
4" coil springs for 93-97 4x4 NEW REQUIRES DROP BRACKETS-$60
Complete rear leaf spring w/shackle and bolts NEW 93-2000 and possibly other years-$120
ARE fiberglass bed cap for styleside bed dark red-$150
Hood 98-00 red no rust slight bend near windshield on driver side easily fixable-$150
Pro-comp adjustable camber/caster shims 93-97 2 and 4wd +/- 2.5 degrees-$30
Parts are located in Angola ny. Email me at [email protected]. I may be willing to meet depending on distance.

Last edited by Johnny Mac; 05-09-2010 at 12:56 AM.
  #2  
Old 05-05-2010
Police Interceptor's Avatar
Member
iTrader: (9)
 
Join Date: Feb 2010
Location: berea ohio
Posts: 495
What engine are the headers for?
  #3  
Old 05-05-2010
d0sitmatr's Avatar
Member
iTrader: (2)
 
Join Date: Jan 2010
Location: SFL
Posts: 706
Quote:
Originally Posted by Police Interceptor View Post
What engine are the headers for?
Im going out on a limb and going to say for the 3.0l, since its in the title header
  #4  
Old 05-06-2010
Police Interceptor's Avatar
Member
iTrader: (9)
 
Join Date: Feb 2010
Location: berea ohio
Posts: 495
Oops didn't see that lol thanks
  #5  
Old 05-06-2010
d0sitmatr's Avatar
Member
iTrader: (2)
 
Join Date: Jan 2010
Location: SFL
Posts: 706
np mate
  #6  
Old 05-06-2010
Member
 
Join Date: Oct 2009
Location: Blue Rock
Posts: 125
Not sure where angola is? How far from Elicottville is that?
  #7  
Old 05-06-2010
Police Interceptor's Avatar
Member
iTrader: (9)
 
Join Date: Feb 2010
Location: berea ohio
Posts: 495
I want the headers if you will seperate
  #8  
Old 05-06-2010
Member
Thread Starter
 
Join Date: Jun 2006
Location: Angola NY
Posts: 162
Quote:
Not sure where angola is? How far from Elicottville is that?
its about 30 miles, northwest. I'd meet you in Gowanda, its exactly halfway. what are you interested in?
  #9  
Old 05-06-2010
Member
Thread Starter
 
Join Date: Jun 2006
Location: Angola NY
Posts: 162
headers are sold
  #10  
Old 05-07-2010
Member
 
Join Date: Oct 2009
Location: Blue Rock
Posts: 125
Got a pic of the cap? On the truck? I am traveling to Ellicotville in August? Just a thought.
  #11  
Old 05-09-2010
Member
Thread Starter
 
Join Date: Jun 2006
Location: Angola NY
Posts: 162
here it is on my 97
Attached Thumbnails
98-00 exhaust parts, intake, seats, bed cap, 3.0L extended cab - NY-0225091632a.jpg  
  #12  
Old 05-10-2010
Member
 
Join Date: Oct 2009
Location: Blue Rock
Posts: 125
Just a thought? If we can work something out for August?
  #13  
Old 05-11-2010
Member
Thread Starter
 
Join Date: Jun 2006
Location: Angola NY
Posts: 162
it would depend, i'm trying to make room by getting rid of it so i'm selling it asap but its yours if no one buys it before then
  #14  
Old 05-11-2010
Member
 
Join Date: Oct 2009
Location: Blue Rock
Posts: 125
Yeah, I completely understand. I will keep it mind, due the same. If someone buys it let me know.
  #15  
Old 05-11-2010
Adj2000's Avatar
Member
 
Join Date: May 2010
Location: East Granby, CT.
Posts: 43
How much of an increase in horsepower do you get from the intake? I'm going through what you just did, I WANT MORE POWER. If I put it on my truck will I be able to finally drive in the fast lane?
  #16  
Old 05-11-2010
d0sitmatr's Avatar
Member
iTrader: (2)
 
Join Date: Jan 2010
Location: SFL
Posts: 706
Quote:
Originally Posted by Adj2000 View Post
How much of an increase in horsepower do you get from the intake? I'm going through what you just did, I WANT MORE POWER. If I put it on my truck will I be able to finally drive in the fast lane?
uhm... none. or at least not enough to even remotely feel.
the only thing you might notice is a fractional increase in mileage per tank, and only then if its setup correctly.
  #17  
Old 05-11-2010
Adj2000's Avatar
Member
 
Join Date: May 2010
Location: East Granby, CT.
Posts: 43
So your saying I ought to switch it out for a 4.0L if I want any real power.
  #18  
Old 05-13-2010
Member
Thread Starter
 
Join Date: Jun 2006
Location: Angola NY
Posts: 162
Quote:
uhm... none. or at least not enough to even remotely feel.
the only thing you might notice is a fractional increase in mileage per tank, and only then if its setup correctly.
i beg to differ. the throttle response was much better, and the mileage increase i calculated was 2-3 miles per gallon better over stock, no BS. i am very **** about checking my truck's mileage and i went from an average of 19 to an average of 21. one tank i did get 22, but i drove like a saint the whole way. Net horsepower increase is small, definitely noticeable. ballpark, 5 hp gain.
  #19  
Old 05-13-2010
Adj2000's Avatar
Member
 
Join Date: May 2010
Location: East Granby, CT.
Posts: 43
Just to be clear the intake is about a 5hp gain and your selling it with the jet MAF what does the jet MAF give I'm seriuosly interested in posiblly taking this off your hands.
  #20  
Old 05-13-2010
d0sitmatr's Avatar
Member
iTrader: (2)
 
Join Date: Jan 2010
Location: SFL
Posts: 706
sorry John, I wasnt trying to blackball your for sale thread.
Im also running a straight pipe intake on my 3.0l and when I first installed it, my gains were marginal at best. it wasnt until I isolated the cone intake from the rest of the engine bay so it was pulling in cooler air that I noticed an increase across the board, so I should have said "none unless setup correctly."
  #21  
Old 05-14-2010
Member
Thread Starter
 
Join Date: Jun 2006
Location: Angola NY
Posts: 162
Hey, were all here to share knowledge of things we've learned. The KIPK II does have the heat shield. the set up works better with the jet MAF for sure. basically the jet MAF tells the engine more air is coming in, so an intake with the factory MAF will yield minimal gains. when you look at the regular MAF there is a bar in the middle. the jet doesnt have that bar. no bar = more flow = more power. the intake and the jet frees up at least 5hp at the rear wheels. the K&N dyno sheet says it ads 5 hp by itself, but thats in a controlled environment.
  #22  
Old 05-28-2010
Member
Thread Starter
 
Join Date: Jun 2006
Location: Angola NY
Posts: 162
still have all of this stuff for sale guys, feel free to email me!
Closed Thread

Related Topics
Thread Thread Starter Forum Replies Last Post
will 60/40 seats from a '03 extended cab fit in a '97 single cab? jordanvw Interior Semi-Tech 3 04-18-2011 09:32 AM
Extended Extended cab? Briar New Ideas 7 01-13-2011 10:57 AM
Want to Buy: 2000+ seats for 98 extended cab ranger (MO/KS) ccernst Interior, Exterior, Electrical, & Misc. 0 09-26-2009 01:19 AM
'08 extended cab seats in '08 regular cab BlutoBodine Interior Semi-Tech 6 09-10-2009 07:04 AM
Sub in extended cab and still use the jump seats BNF861 Audio & Video Tech 14 06-19-2008 12:32 PM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -6. The time now is 08:02 PM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.