Engine & Drivetrain Ford Ranger engine and drivetrain parts, i.e. radiators, driveshafts, knuckles, brakes.

For Sale: 98 up Rugged Ridge lock-outs, front hubs/bearings, CV axles. WA

  #1  
Old 04-10-2011
Member
Thread Starter
Join Date: Feb 2011
Location: Oak Harbor, WA
Posts: 43
98 up Rugged Ridge lock-outs, front hubs/bearings, CV axles. WA

Removed from my 98 Ranger 4x4 and was replaced with Explorer parts. Everything to convert your truck to free-wheel front hubs. Not sure of the mileage, but everything is in good condition. Sold the truck, removed these, the lift and tires.

Two used hubs for 4WABS. $150 pair.
Two used front CV axle shafts $150 pair.
Used Rugged Ridge locking hubs $100 pair
One new in the box front hub for 4WABS: $100

Located in Oak Harbor, WA. Will sell everything for $400. Shipping is available. I will get some pictures up soon.
 
  #2  
Old 04-10-2011
hurley's Avatar
Member
iTrader: (3)
Join Date: Dec 2010
Location: West Belmar NJ
Posts: 1,491
I wish you put this up like three weeks ago. I just bought a pair of rugged ridge hubs for like $150.
 
  #3  
Old 04-10-2011
Downey's Avatar
RF Veteran
iTrader: (1)
Join Date: Oct 2007
Location: Muncy, PA
Posts: 8,470
i hate to do this to your thread but how did you gain anything from going rugged ridge hubs to your current set up? the rugged hubs are free wheeling......
 
  #4  
Old 04-10-2011
hurley's Avatar
Member
iTrader: (3)
Join Date: Dec 2010
Location: West Belmar NJ
Posts: 1,491
^ me or him?
 
  #5  
Old 04-11-2011
Member
Thread Starter
Join Date: Feb 2011
Location: Oak Harbor, WA
Posts: 43
Originally Posted by Downey View Post
i hate to do this to your thread but how did you gain anything from going rugged ridge hubs to your current set up? the rugged hubs are free wheeling......
An older gentleman purchased the truck from me and he didn't want to get out and lock the hubs when he needed 4wd, so seeing as I was dropping the lift, I just used the explorer knuckles with the hubs and axles already attached to them. He won't drive it too much so he wouldn't see much of a difference in fuel mileage.

Sorry I didn't get any pictures yet...spent the day driving around buying and selling parts and picking up a 'new' project truck.
 
  #6  
Old 04-15-2011
Member
Thread Starter
Join Date: Feb 2011
Location: Oak Harbor, WA
Posts: 43
Anyone interested in any of this? I sure would like to get some of my space back.
 
  #7  
Old 04-15-2011
99offroadrngr's Avatar
TOYOTA
iTrader: (37)
Join Date: Jul 2007
Location: Massachusetts
Posts: 11,728
if you get pictures of stuff people may gain interest. I'm interested in the hubs but I want to make sure they're not destroyed. inside splines, outsides, and the o-rings
 
  #8  
Old 04-15-2011
Member
Thread Starter
Join Date: Feb 2011
Location: Oak Harbor, WA
Posts: 43
Originally Posted by 99offroadrngr View Post
if you get pictures of stuff people may gain interest. I'm interested in the hubs but I want to make sure they're not destroyed. inside splines, outsides, and the o-rings
all you have to do is ask, especially if you want specific pics. I will see what I can do.
 
  #9  
Old 04-17-2011
Member
Thread Starter
Join Date: Feb 2011
Location: Oak Harbor, WA
Posts: 43
Pictures

Let me know if you need any different pics.
 
Attached Thumbnails 98 up Rugged Ridge lock-outs, front hubs/bearings, CV axles. WA-dscn0908.jpg   98 up Rugged Ridge lock-outs, front hubs/bearings, CV axles. WA-dscn0909.jpg   98 up Rugged Ridge lock-outs, front hubs/bearings, CV axles. WA-dscn0911.jpg   98 up Rugged Ridge lock-outs, front hubs/bearings, CV axles. WA-dscn0912.jpg  
  #10  
Old 04-17-2011
Member
Thread Starter
Join Date: Feb 2011
Location: Oak Harbor, WA
Posts: 43
hubs and axles.

One of the ABS sensors came from my wrecked Explorer, so the wire was cut in the accident. Hubs were NOT involved in the wreck, I just needed the sensor for the Ranger.
 
Attached Thumbnails 98 up Rugged Ridge lock-outs, front hubs/bearings, CV axles. WA-dscn0915.jpg   98 up Rugged Ridge lock-outs, front hubs/bearings, CV axles. WA-dscn0916.jpg   98 up Rugged Ridge lock-outs, front hubs/bearings, CV axles. WA-dscn0917.jpg   98 up Rugged Ridge lock-outs, front hubs/bearings, CV axles. WA-dscn0918.jpg   98 up Rugged Ridge lock-outs, front hubs/bearings, CV axles. WA-dscn0919.jpg  

98 up Rugged Ridge lock-outs, front hubs/bearings, CV axles. WA-dscn0920.jpg  
  #11  
Old 06-01-2011
Member
Thread Starter
Join Date: Feb 2011
Location: Oak Harbor, WA
Posts: 43
Bump...this stuff is still available.
 
  #12  
Old 11-02-2011
Member
Thread Starter
Join Date: Feb 2011
Location: Oak Harbor, WA
Posts: 43
bump...still available and taking up room.
 
  #13  
Old 11-17-2011
Kris03's Avatar
Member
Join Date: Jun 2011
Location: glastonbury, ct
Posts: 1,236
so my vacuum hubs are locked in on my 99. replacing them with the rugged rigde manual hubs will fix that right?
 
  #14  
Old 11-17-2011
Join Date: Dec 2008
Location: Plattsburgh, New York
Posts: 3,390
yes
 
  #15  
Old 11-17-2011
Kris03's Avatar
Member
Join Date: Jun 2011
Location: glastonbury, ct
Posts: 1,236
how much with shipping to CT-06033

basically i take out the old and put in the new?
 
  #16  
Old 11-22-2011
Member
Thread Starter
Join Date: Feb 2011
Location: Oak Harbor, WA
Posts: 43
Originally Posted by Kris03 View Post
how much with shipping to CT-06033

basically i take out the old and put in the new?
Looks like $12 for USPS Priority flat rate box.

Yup, just pull the old ones off and put these on.
 
  #17  
Old 11-22-2011
Member
Thread Starter
Join Date: Feb 2011
Location: Oak Harbor, WA
Posts: 43
New Prices

Two used hubs for 4WABS. $50 pair.
Two used front CV axle shafts $100 pair.
Used Rugged Ridge locking hubs $100 pair
One new in the box front hub for 4WABS: $50

Located in Oak Harbor, WA. Will sell everything for $250. Shipping is available.

Will take PAYPAL for payment.
 

Last edited by Ford005; 11-22-2011 at 09:04 PM. Reason: payment method
  #18  
Old 01-04-2012
Member
Thread Starter
Join Date: Feb 2011
Location: Oak Harbor, WA
Posts: 43
Still available....
 
  #19  
Old 01-09-2012
Member
iTrader: (2)
Join Date: Mar 2010
Location: Keyser, WV
Posts: 44
$75 for the hubs? Do you have the part # from them?
 
  #20  
Old 01-09-2012
StxDangerRanger's Avatar
RF Veteran
iTrader: (2)
Join Date: Dec 2010
Location: Flat Rock, Mi
Posts: 6,313
You'll need to put your pictures back up due to our recent site issue. I can help if you'd like.
 
  #21  
Old 01-09-2012
Member
Thread Starter
Join Date: Feb 2011
Location: Oak Harbor, WA
Posts: 43










Did you want the # on the Ruged Ridge locking hubs or the wheel hub assemblies?

The # for the wheel hub is pbr930342.
Ruged Ridge locking hubs is 15001.7

Let me think about that price...the wheel hubs go for around $150 each new and the Ruged Ridge hubs are $150-170 new.
 
Attached Images
File Type: jpg
DSCN0908.JPG (932.9 KB, 2234 views)
File Type: jpg
DSCN0912.JPG (1.79 MB, 1976 views)
File Type: jpg
DSCN0917.JPG (1,010.2 KB, 1955 views)
File Type: jpg
DSCN0918.JPG (961.5 KB, 2037 views)
File Type: jpg
DSCN0920.JPG (957.0 KB, 1979 views)

Last edited by 98liftedranger; 01-10-2012 at 05:33 PM.
  #22  
Old 01-10-2012
dieselT4x4's Avatar
Member
Join Date: Dec 2010
Location: Pembine, WI
Posts: 65
if it helps at all those rugged ridge hubs are kinda hard to find anywhere else... I bought mine maybe two years ago and had to wait 6 months.
 
  #23  
Old 01-10-2012
Member
iTrader: (2)
Join Date: Mar 2010
Location: Keyser, WV
Posts: 44
Ok let me know. Those are the ones I need.
 
  #24  
Old 01-28-2012
Level III Supporter
iTrader: (2)
Join Date: Nov 2010
Location: Maine
Posts: 1,231
Do you know what the mileage on is the 4WABS hubs?
 
  #25  
Old 01-28-2012
Member
Thread Starter
Join Date: Feb 2011
Location: Oak Harbor, WA
Posts: 43
I don't know how many miles were on the truck as the ex gauge cluster was swapped in when I got it, or if/when they had been replaced before.
 

Thread Tools
Search this Thread
Quick Reply: For Sale: 98 up Rugged Ridge lock-outs, front hubs/bearings, CV axles. WA


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.