For Sale: AXLE explorer 410s l/s ranger ready (ont) - Ranger-Forums - The Ultimate Ford Ranger Resource


Engine & Drivetrain Ford Ranger engine and drivetrain parts, i.e. radiators, driveshafts, knuckles, brakes.

Closed Thread
 
LinkBack Thread Tools Search this Thread
  #1  
Old 09-29-2009
howells's Avatar
Member
Thread Starter
iTrader: (2)
 
Join Date: Jan 2008
Location: Kitchener ont
Posts: 779
AXLE explorer 410s l/s ranger ready (ont)

last try on this fully built everything new, pads ,rotors,calipers, new ebrake shoes, springs and ebrake cables, new axle seals and pinion seal, new diff cover and just filled with royal purple max gear. perches already filped and shock tabes already welded on. just put it under your truck can help if you want. final price $350 cant even build it for that price, i paid more then then that just for the parts.





  #2  
Old 09-29-2009
korey89's Avatar
Member
iTrader: (2)
 
Join Date: Mar 2008
Location: South, FL
Posts: 4,672
this is a damn good deal, someone better buy it
  #3  
Old 09-29-2009
howells's Avatar
Member
Thread Starter
iTrader: (2)
 
Join Date: Jan 2008
Location: Kitchener ont
Posts: 779
im loosing big time but somone will get a killer deal. i cant just have it sitting around
  #4  
Old 09-29-2009
Fx4wannabe01's Avatar
RF Veteran
iTrader: (23)
 
Join Date: May 2005
Location: Boring, Oregon
Posts: 21,721
I want it but can't handle the freight to get it to me.
  #5  
Old 09-29-2009
howells's Avatar
Member
Thread Starter
iTrader: (2)
 
Join Date: Jan 2008
Location: Kitchener ont
Posts: 779
ya thats the problem with this item....its about a ton lol
  #6  
Old 09-29-2009
Ford04Ranger4.0's Avatar
Member
 
Join Date: Dec 2008
Location: Plattsburgh, New York
Posts: 3,390
Wish it was closer... Good luck with the sale
  #7  
Old 09-29-2009
cchsbuzz19's Avatar
Member
iTrader: (5)
 
Join Date: Jul 2007
Location: North Canton, Ohio
Posts: 2,417
I would buy it in a heart beat if you were closer. Good luck with the sale.
  #8  
Old 09-29-2009
KLC's Avatar
KLC KLC is offline
RF Veteran
iTrader: (29)
 
Join Date: Nov 2007
Location: New Mexico
Posts: 13,115
About how much would freight cost?
  #9  
Old 09-29-2009
Lazler's Avatar
Senior Member
iTrader: (18)
 
Join Date: Dec 2008
Location: Brantford, Ontario
Posts: 5,526
too damn much and clayton after i get my passport i can meet u near the ohio/michigan border
  #10  
Old 09-29-2009
howells's Avatar
Member
Thread Starter
iTrader: (2)
 
Join Date: Jan 2008
Location: Kitchener ont
Posts: 779
^^^lazler can vouch for all my stuff he has seen it all......
  #11  
Old 09-29-2009
Lazler's Avatar
Senior Member
iTrader: (18)
 
Join Date: Dec 2008
Location: Brantford, Ontario
Posts: 5,526
heck yes.. it'd be mine if my truck was cheaper haha
  #12  
Old 09-29-2009
Seb_L's Avatar
Member
iTrader: (1)
 
Join Date: Jun 2009
Location: Ottawa, Ontario
Posts: 1,071
If no one takes it by mid Oct. I will most likely have the money for it. I want discs...

As of Oct. 5th I will start getting money to pay bills and stuff but usually rack in an extra 200$ a week. Just never know what might happen.

I'll keep this thread in my favorites and as soon as I have the $$ I'll PM you, and obviously I can come get it lol
  #13  
Old 09-29-2009
howells's Avatar
Member
Thread Starter
iTrader: (2)
 
Join Date: Jan 2008
Location: Kitchener ont
Posts: 779
cool man i am pretty sure i will still have if. if you want we can install it in my driveway. i have done it a few times ,we could bang it out in a hour with no mesing around.
  #14  
Old 09-29-2009
seed60's Avatar
RF Veteran
iTrader: (15)
 
Join Date: Jun 2008
Location: Mooresville, NC
Posts: 5,584
Quote:
Originally Posted by Fx4wannabe01 View Post
I want it but can't handle the freight to get it to me.
x2
  #15  
Old 09-29-2009
cchsbuzz19's Avatar
Member
iTrader: (5)
 
Join Date: Jul 2007
Location: North Canton, Ohio
Posts: 2,417
Taking interest into Lazlers idea, i pmed him. 4 wheel disc would be so nice for my Landscaping trailer I haul. Question, would I need to get a master cylinder out of an explorer right away or can I use mine for a while?
  #16  
Old 09-29-2009
Dangerranger01's Avatar
Member
iTrader: (6)
 
Join Date: Nov 2005
Location: Boring/Corvallis, Oregon
Posts: 2,011
You should be fine with the ranger master cylinder. I know i am with my cobra rear brakes. Lots of guys do the swap fine with changine MC..
  #17  
Old 09-29-2009
howells's Avatar
Member
Thread Starter
iTrader: (2)
 
Join Date: Jan 2008
Location: Kitchener ont
Posts: 779
no you dont have to swap anything just put it in...now with that said your front has to be geared with 4.10 unless you dont want to use 4x4 cause if you engauge 4x4 with different gear ratios start looking for a new driveline....lol. but for braking it will work no problem i also have the expo ebrake connector so your ebrakes will work just like stock.
  #18  
Old 09-29-2009
howells's Avatar
Member
Thread Starter
iTrader: (2)
 
Join Date: Jan 2008
Location: Kitchener ont
Posts: 779
sorry put it in and bleed......you get the idea.
  #19  
Old 09-29-2009
southernranger's Avatar
Member
 
Join Date: Mar 2009
Location: Georgia
Posts: 44
can you get a freight quote to zip code 31021 and PM me?
  #20  
Old 09-29-2009
howells's Avatar
Member
Thread Starter
iTrader: (2)
 
Join Date: Jan 2008
Location: Kitchener ont
Posts: 779
this thing is not going to be shipped it would be a huge hassle being that 2 people struggle to carry it....it honestly is f...ing heavy.
  #21  
Old 09-29-2009
Rolldogg's Avatar
Member
 
Join Date: Jan 2006
Location: Ottawa, Ontario
Posts: 3,424
Now to try to convince the wife that I need to spend "some" money on a new rear end, and tires/rims.......LOL

Man oh man. I'm just trying to remind myself that I "should" be looking for a "family" vehicle and NOT trying to drop more $$$ into the Ranger that I'm "suppose" to be trying to sell. LOL
  #22  
Old 09-29-2009
cchsbuzz19's Avatar
Member
iTrader: (5)
 
Join Date: Jul 2007
Location: North Canton, Ohio
Posts: 2,417
How many miles are on it?
  #23  
Old 09-29-2009
howells's Avatar
Member
Thread Starter
iTrader: (2)
 
Join Date: Jan 2008
Location: Kitchener ont
Posts: 779
60,000 miles approx. it had 99XXX km when i got it and replaced everything so i wouldnt have any trouble with it. the only thing i didnt replace was the wheel bearings cause there was nothing wrong with them and they looked like new. these 31 splines are strong it will last longer then all the trucks on here.....lol
  #24  
Old 09-29-2009
cchsbuzz19's Avatar
Member
iTrader: (5)
 
Join Date: Jul 2007
Location: North Canton, Ohio
Posts: 2,417
Will I have any Backspacing issues? I've got 15x8" wheels with 3.75" backspacing.
  #25  
Old 09-29-2009
howells's Avatar
Member
Thread Starter
iTrader: (2)
 
Join Date: Jan 2008
Location: Kitchener ont
Posts: 779
no it will be fine. you can even run factory ranger wheels on it no problem
Closed Thread

Related Topics
Thread Thread Starter Forum Replies Last Post
I'm about ready to ditch the explorer its pissing me off Sonic04Edge General Ford Ranger Discussion 26 11-29-2011 12:10 AM
Checking Interest: Ranger parts (ONT) ShadowRanger08 Interior, Exterior, Electrical, & Misc. 76 02-13-2010 02:16 PM
For Sale: EXPLORER AXLE 4.10s L/S everything new (ONT) howells Engine & Drivetrain 12 09-23-2009 07:29 PM
WTB: 6' Box Cap for 00' Ranger (ONT) Skuce Interior, Exterior, Electrical, & Misc. 2 05-05-2009 09:49 PM
FS: 1993 Ranger XLT 4x4 (ONT) 281Thunder Ranger Based Vehicles 8 04-07-2009 05:45 PM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -6. The time now is 10:10 AM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.