Checking Interest: Built 4.0, heads, 5 spd mustang tranny, turbo... Albemarle NC - Ranger-Forums - The Ultimate Ford Ranger Resource


Engine & Drivetrain Ford Ranger engine and drivetrain parts, i.e. radiators, driveshafts, knuckles, brakes.

Closed Thread
 
LinkBack Thread Tools Search this Thread
  #1  
Old 11-29-2009
NicksterSVT's Avatar
Member
Thread Starter
 
Join Date: Apr 2005
Location: NC
Posts: 1,955
Built 4.0, heads, 5 spd mustang tranny, turbo... Albemarle NC

i have decided to take a different route with my drivetrain... checking interest on my stuff.

built 4.0 short block(less than 20k miles) for boost with arp studs, timing chains, water pump....

worked over heads with larger ss valves and crower cobra valve springs

garrett t3(basically a gt35r) turbo

full stainless custom exhaust for the turbo setup

front mount intercooler

60lb moto tron injectors

tremec 5spd tranny from a 2007 mustang(bolts up to the 4.0)

brand new set of manual tranny petals

brand new clutch master cyl

ranger pcm

the list goes on... if you are interested, let me know, we will discuss prices from there...
  #2  
Old 11-29-2009
NicksterSVT's Avatar
Member
Thread Starter
 
Join Date: Apr 2005
Location: NC
Posts: 1,955
just for those who havent seen my setup:

start here: https://www.ranger-forums.com/forum2...s-here-18.html
  #3  
Old 11-29-2009
99ranger4x4's Avatar
RF Veteran
iTrader: (3)
 
Join Date: Jun 2006
Location: Austin, TX
Posts: 12,198
are they sohc heads?
  #4  
Old 11-29-2009
NicksterSVT's Avatar
Member
Thread Starter
 
Join Date: Apr 2005
Location: NC
Posts: 1,955
Quote:
Originally Posted by 99ranger4x4 View Post
are they sohc heads?
yes, and as a matter of fact, they are still at the machine shop... i cant take pix of them until i get them back
  #5  
Old 11-29-2009
Jp7's Avatar
Jp7 Jp7 is offline
Member
iTrader: (9)
 
Join Date: Sep 2007
Location: My LED lab or on the dyno
Posts: 2,970
I have a 35R for my car, a 4.0 would really make it spool quick.
  #6  
Old 11-29-2009
fraser19's Avatar
Member
 
Join Date: Jul 2009
Location: calgary alberta
Posts: 275
pm'd
  #7  
Old 11-29-2009
yellow rhino's Avatar
Member
 
Join Date: Sep 2006
Location: CA Westlake Village
Posts: 1,771
Will those injectors work on my 3.0?
  #8  
Old 11-29-2009
NicksterSVT's Avatar
Member
Thread Starter
 
Join Date: Apr 2005
Location: NC
Posts: 1,955
Quote:
Originally Posted by yellow rhino View Post
Will those injectors work on my 3.0?
none of this stuff will just "bolt on". pretty much everything listed will require custom tuning.

idk if they will work on the 3.0, but unless you have LOTS of motor work or plan on running E85, you will heed no gains from just the injectors
  #9  
Old 11-29-2009
zabeard's Avatar
who?
iTrader: (8)
 
Join Date: Nov 2004
Location: IN
Posts: 26,045
mmm i love this thread. :)
  #10  
Old 11-30-2009
NicksterSVT's Avatar
Member
Thread Starter
 
Join Date: Apr 2005
Location: NC
Posts: 1,955
Quote:
Originally Posted by zabeard View Post
mmm i love this thread. :)
lol
  #11  
Old 12-02-2009
Jp7's Avatar
Jp7 Jp7 is offline
Member
iTrader: (9)
 
Join Date: Sep 2007
Location: My LED lab or on the dyno
Posts: 2,970
Quote:
Originally Posted by NicksterSVT View Post
idk if they will work on the 3.0, but unless you have LOTS of motor work or plan on running E85, you will heed no gains from just the injectors
Injuctors just need to be pulse scaled and latency adjusted.
  #12  
Old 12-03-2009
Member
 
Join Date: Mar 2009
Location: lake ariel
Posts: 44
I sent a pm but got no response, can you at least post some prices.
  #13  
Old 12-03-2009
fourliter dan's Avatar
Member
 
Join Date: Dec 2007
Location: Lebanon, OR
Posts: 2,229
will you have a custom tune and burn for this? dosent seem like you would skimp on that with the caliber of your project. are you upgrading fuel pumps as well?
  #14  
Old 12-03-2009
David N's Avatar
Member
 
Join Date: Dec 2008
Location: Williamston, NC
Posts: 1,060
What kind of power is this thing putting out? Est?
  #15  
Old 12-03-2009
NicksterSVT's Avatar
Member
Thread Starter
 
Join Date: Apr 2005
Location: NC
Posts: 1,955
Quote:
Originally Posted by popeye View Post
I sent a pm but got no response, can you at least post some prices.
i just sent you a pm, copy pasted:

sorry i havent gotten back to you until now. the short block will be sold assembled. This will include the block .030 over, race prepped rods, brand new crank, wiseco forged pistons, oil pan, oil pump, timing chains and guides, and water pump. I am asking 2000 for the assembled unit. when i say brand new, the crank was replaced when i did all of the work to the motor. motor has less than 20k miles on it.
  #16  
Old 12-03-2009
NicksterSVT's Avatar
Member
Thread Starter
 
Join Date: Apr 2005
Location: NC
Posts: 1,955
Quote:
Originally Posted by fourliter dan View Post
will you have a custom tune and burn for this? dosent seem like you would skimp on that with the caliber of your project. are you upgrading fuel pumps as well?
are you asking about my future drivetrain? i can custom tune any 96-up ford(pretty much any of them). i upgrade fuel pumps on everything!
  #17  
Old 12-03-2009
NicksterSVT's Avatar
Member
Thread Starter
 
Join Date: Apr 2005
Location: NC
Posts: 1,955
Quote:
Originally Posted by David N View Post
What kind of power is this thing putting out? Est?
its incomplete. no numbers as of yet. if you want me to estimate hp numbers on the full setup, i would say 400+. I am taking a different route, i have lost interest in the 4.0sohc...
  #18  
Old 12-24-2009
robert ray69's Avatar
Member
iTrader: (3)
 
Join Date: Nov 2008
Location: columbia,sc
Posts: 99
whats the cr on the pistons?
  #19  
Old 12-24-2009
NicksterSVT's Avatar
Member
Thread Starter
 
Join Date: Apr 2005
Location: NC
Posts: 1,955
Quote:
Originally Posted by robert ray69 View Post
whats the cr on the pistons?



8.8:1 wiseco forged
  #20  
Old 12-24-2009
BurningRANGERtires's Avatar
Member
 
Join Date: Jun 2008
Location: North Sin City, NV
Posts: 312
man this is tempting. it would be nice to have a spare motor for when mine dies... how much you looking for the transmission and new clutch pedals??
  #21  
Old 12-25-2009
NicksterSVT's Avatar
Member
Thread Starter
 
Join Date: Apr 2005
Location: NC
Posts: 1,955
Quote:
Originally Posted by BurningRANGERtires View Post
man this is tempting. it would be nice to have a spare motor for when mine dies... how much you looking for the transmission and new clutch pedals??


i would like to get 850 for the pedals, transmission, crossmember, and shifter(that has been shortened for my truck)
Closed Thread

Related Topics
Thread Thread Starter Forum Replies Last Post
For Sale: 3.0L V6 Vulcan Cylinder Heads - Pair - Dover Cylinder Heads Prerunner-Ranger Engine & Drivetrain 1 09-27-2015 07:48 AM
Want to Trade: Black Heads/Corners for 06+ OEM Heads/Corners (NorCal) 2004xlmiller Interior, Exterior, Electrical, & Misc. 7 06-05-2012 11:03 PM
89 2wd spd tranny oil Jimroad471 General Ford Ranger Discussion 2 04-17-2011 04:12 PM
For Sale: Custom Built Box, Sub, amp etc,,.built for Ex Cab Ranger., Skid Plate< Bs03fx4 Interior, Exterior, Electrical, & Misc. 15 12-14-2010 05:12 PM
For Sale: Sport Trac wheels & 255-70 16 michelin ltx Albemarle NC NicksterSVT Suspension, Tires, & Wheels 8 11-27-2009 11:38 PM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -6. The time now is 07:37 AM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.