fx4 shifter+boot
 

looking for a fx4 shifter and boot

http://z.about.com/d/trucks/1/0/q/z/08RANG_FX4IP.jpg

I have a boot...PM me if you're interested!

why not just buy a hurst shifter. not trying to fill your thread with bs just wondering

I'll let you know. I'd like to just find them together if I can.

I like the stock shift length. I just want it to look nicer and readjust the location of the shifter to a more comfortable position. Hurst is the last option if I cant find an fx4.

I for one like the Hurst and will be using the FX4 Boots and Bezel on the Hurst Twin Stick Swap and the Hurst with the FX4 Boots looks good.

You don’t have one now and you want to install the FX4 Stick and Boot in your rig ?
What Bezel will you be using ?
I for one think the FX4 Boot will not fit the Std dual cup holder bezel.
The pic in the OP is either a new setup or different boot from the FX4.
FX4 Boots have rings in the bottom of them to clip in the Bezel, they are not flexible enough to shape differently and fit the dual cup holder bezel unless the Bezel is mod’d.

Just me thinking out loud, sorry not trying to confuse.

Get pics let us see what you have and finished pics when done !

ltr

Grev, I believe they had a different boots for the non twin stick FX4 manual trucks. Here is an 04 Level II with the setup he's wanting.
http://www.tri-cityautoparts.com/ima...RANGER_003.jpg
I've gotten a few parts off of this truck, and the leather seats and shifter are now gone. The Lvl II tow hooks are on my truck. :biggthump

I know Shane had mentioned he had several spare FX4 shifters. I don't know if he still does though. I wish I knew someone that had some spares laying around. :wink:

hey mike, what i used for my LVL II shifter, i found a leather boot at the local autozone, it was pretty inexpensive, as for the shifter, sorry bud can't help you there, the one i have is pretty happy in its home

OK, didn’t know that 1
Good go then I can see what you want and it should look good.

ltr