Yes, this is the same bracket Dangerranger01 was selling. Turns out I had the means to mount the linkage already and didn't need the bracket.





Here's a link to the original sale thread and TrePaul's build thread.
https://www.ranger-forums.com/f54/ma...dapter-104072/
https://www.ranger-forums.com/f42/tr...thread-103984/

NOTE: Check to make sure you do or don't have the thread bosses on the driver side of your transmission before purchasing. If you don't have them, you'll need this bracket to mount a manual transfer case linkage.

The price is going to be $75 shipped same as what I paid.

Grant doesn't know if he will be making more of these so it might be a good idea to ****** this up while its available.

 

bump I know someone wants this

 

FWIW....more description.....


This is REQUIRED for 01+ manual trans trucks looking to do a manual transfer case. SOME autos have the threads in the tailhousing for the linkage....SOME autos don't. I've seen both in person.


Good luck Justin!! Hope you can get it moved.

 

Thanks for the info, that was my original mistake, I didn't check.

Remember this keeps you from having buy the expensive tail housing.

 

This is the way to go over the Lvl II tail housing if you don't care about using original Lvl II parts which most people can't find anyways. The worst part of the tail housing isn't the price it the installation. I'd say it adds 2 hours to the install and gives you a new place to have a leak if you swap in the Lvl II one. If it does leak you have to rip it all back out to try to fix the leak. Ask me how I know. :(


Good luck with the sale. Some one should ****** it up.

 

Good advice. And another reason why someone should consider this.

 

Bump

 

i want it, but i am broke for the next few weeks.

 

 

Bump

 

bump, somebody's gonna need this

 

Bump, get em while they're hot!

 

bump

 

bump

 

bump

 

PM sent

 

sale pending

 

sold