Rear Aluminum Driveshaft -- SC
Ive got my rear factory aluminum driveshaft for sale..from an 04 edge 4x4
located in Charleston,SC Id probably ship it..I mean its kinda light for what it is..wrap that beast in bubble wrap and throw a sticker on it and call it a day.. id guess id ask 100 plus shipping? |
you should put up year, bed length, and cab size.
|
From my experiences, no company will ship it without a box. I tried UPS and FEDEX with bubble wrap only. No go. They said that their automated equipment would tear the wrap up, so it must have a box.
My guess on the length would be an extended cab only. GB :) |
Originally Posted by Masteratarms93
(Post 1751379)
you should put up year, bed length, and cab size.
I don't think hozl's truck had an aluminum driveshaft |
Originally Posted by Bird76Mojo
(Post 1751451)
From my experiences, no company will ship it without a box. I tried UPS and FEDEX with bubble wrap only. No go. They said that their automated equipment would tear the wrap up, so it must have a box.
|
Just so you guys know I bought an aluminum driveshaft off ebay for my mustang and I received it in bubble wrap, it came perfectly fine via UPS ground.
|
I sent a guitar stand through FedEx that was cardboarded around but still in its general shape. Just make a flat place to the put the label. If you print it out online make sure you check the box that says that it is misshapen or irregular or whatever.
Theyll take it. And charge you for it. Post whether you have a extended or supercab. I think that affects it. mayybe not. |
Originally Posted by Masteratarms93
(Post 1751648)
Post whether you have a extended or supercab. I think that affects it. mayybe not.
|
Originally Posted by Masteratarms93
(Post 1751648)
Post whether you have a extended or supercab. I think that affects it. mayybe not.
|
Originally Posted by drppdyllwrngr
(Post 1751852)
as far as i know, there never was an alum. drive shaft for reg cabs.
i asked extended or supercab. |
Originally Posted by Masteratarms93
(Post 1751957)
i asked extended or supercab.
|
my bad -- supercab edge..4x4...from my 04
|
Originally Posted by drppdyllwrngr
(Post 1752068)
what's the difference?
They might have quit making the the extended sometime, not sure. i'm not sure if there is any difference in driveshaft length between the 2 |
Originally Posted by Masteratarms93
(Post 1752386)
extended cab is the extra cab but no back doors. supercabs have doors and they do open.
They might have quit making the the extended sometime, not sure. i'm not sure if there is any difference in driveshaft length between the 2 |
Originally Posted by Masteratarms93
(Post 1752386)
extended cab is the extra cab but no back doors. supercabs have doors and they do open.
They might have quit making the the extended sometime, not sure. i'm not sure if there is any difference in driveshaft length between the 2 |
Originally Posted by Masteratarms93
(Post 1752386)
extended cab is the extra cab but no back doors. supercabs have doors and they do open.
They might have quit making the the extended sometime, not sure. i'm not sure if there is any difference in driveshaft length between the 2 You'll notice you said the difference in doors but never mentioned the driveshaft length. They're the same, just one has doors, one doesnt. |
somebody buy my shaft :)
|
I'd love to have one of these for my standard cab but unfortunately there aren't any shops around here that are setup to shorten/weld/balance aluminum driveshafts.
I wonder how much benefit these things really have/give over a stock steel one? Just thinking out loud, sorry. GB :) |
Originally Posted by Red_Ak_Ranger
(Post 1752724)
You'll notice you said the difference in doors but never mentioned the driveshaft length. They're the same, just one has doors, one doesnt.
|
If you could measure from u-joint to u-joint or look to see if there any part numbers on it im interested also if you could snap som pics to show the tube is not dented or damaged, its not that i dont trust its i believe my own eyes
|
Originally Posted by 03 DEMON 4X4 SOHC
(Post 1752810)
If you could measure from u-joint to u-joint or look to see if there any part numbers on it im interested also if you could snap som pics to show the tube is not dented or damaged, its not that i dont trust its i believe my own eyes
|
Wirelessly posted
I can get some pics and all Monday. I'm going to Vegas for the weekend so no pics this weekend.. |
Remember man, when you get the herps in Vegas, they don't stay in Vegas..
GB :) |
All times are GMT -6. The time now is 08:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands