2011 bedliner what years will fit?
 

Looking to get a bed liner. Just wonder what years will fit 2011 ranger sport regular bed.
I found one on offer up but not sure of year. It looks like it's a ford bed liner, is there a part # on them?
thanks,
troy

Best I know is all 7' bed liners (for the styleside) will work. I would be looking for something fairly new, just because of the plastic becoming brittle over time. Good luck in your search!

Anything 93+ should fit, but I do believe there were some long beds that won't work. Just measure your bed and have then measure the liner.

Thanks, guys,
I got the one on offerup.
Now, there is no hardware. Any mounting tips?? It has holes at the tie down locations in front and rear. Also there are 3 round holes on sides at front , middle and rear. I'm just wondering if there is or had been any mounting kits for these?
I found these at Ford sight. VAC3Z-99000A64-B they are tie down anchors that fit in the square holes on top of the bed rails.


Thanks,
troy

Is it an over-the-rail style bedliner, or under-the-rail?

Sorry I forgot , it's over the rail.

There was some type of plug assembly that pushed into those three holes on each side of the liner. If I recall correctly, they gripped onto the bottom lip of the bed rail and that's what kept the liner from flying out.

I can't seem to find them anywhere, which isn't surprising since they were usually part of the entire bedliner assembly. Short of calling your local dealer's parts department (they probably won't know what you're talking about), your only option to find these plugs would be to find them from a junkyard truck.

Yea, your probably right. I do know a few ford parts people. But like you said they are probably not available or hard to find now..
Going to try tho.. see what happens.


thanks,
troy