Edge Conversion question
#1
Edge Conversion question
My truck was in an accident some time ago and I'm just getting around to fixing it. The front end was hit on the driver side and with the parts that need to be replaced I was thinking to just do a edge conversion. Do to the accident I need to replace the header panel, grill, bumper, and valance, along with a few other parts I'm sure. My question is when I look for parts they always say for 01-03 and I have a 04. What is the difference in the parts, will they not fit the 04 XL and what is the complete list of part needed to change the front end of an 04 XL to look like a edge or XLT? thanks
#2
#3
would I be able to use something like this on my truck if I got the proper 04 grill.
http://cgi.ebay.com/ebaymotors/NEW-F...24602265QQrdZ1
http://cgi.ebay.com/ebaymotors/NEW-F...24602265QQrdZ1
#5
#6
You should have a powerdome hood already. It is clam shelled, though. If you get a black grill, either the oem '06 stx honeycomb or a carriage works black billet, it will look real similar to the 02-03 edge. If you go with the true '02-'03 edge grill you would have to change the hood. The 'o4-'05 edge grill has the two vertical bars and are not very good looking (imo).
Someone correct me if I'm wrong, but I thought all 04+ were power domed.
Someone correct me if I'm wrong, but I thought all 04+ were power domed.
#7
#8
The shell. If you want to look like an edge get the shell painted to match the truck and put one of three available inserts in
stock edge (will have 2 vertical bars)
black billet from carriage works will be black, but no vertical bars.
stx grill from '06.
picture this in black as one example:
Also check here for what is available from the '06 models:
http://jusnesmodified.com/store/inde...55_184_208_214
Any of those will fit with no hood changes.
stock edge (will have 2 vertical bars)
black billet from carriage works will be black, but no vertical bars.
stx grill from '06.
picture this in black as one example:
Also check here for what is available from the '06 models:
http://jusnesmodified.com/store/inde...55_184_208_214
Any of those will fit with no hood changes.
Thread
Thread Starter
Forum
Replies
Last Post
aford89
Wheels & Tires Semi-Tech
17
03-29-2009 01:09 AM