Exterior Semi-Tech General discussion of exterior for the Ford Ranger.

Door/Window trim removal/replacement?

Thread Tools
 
Search this Thread
 
  #1  
Old 10-19-2017
MaDMaXX's Avatar
Member
Thread Starter
Join Date: Jul 2017
Location: Oregon
Posts: 784
Likes: 0
Received 0 Likes on 0 Posts
Door/Window trim removal/replacement?

On a 2002, how hard/easy/expensive is it to replace the trim piece that sits along the top of the main door, next to the window (runs from mirror to door handle)
 
  #2  
Old 10-20-2017
JAshley3's Avatar
Member
Join Date: Jul 2017
Location: Lexington, SC
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Just to make sure, are you referring to the trim piece seen in my pic that is missing around the window?


 
  #3  
Old 10-20-2017
MaDMaXX's Avatar
Member
Thread Starter
Join Date: Jul 2017
Location: Oregon
Posts: 784
Likes: 0
Received 0 Likes on 0 Posts
Sorry, no, the piece in your photo that has been worn on the top edge (revealing bare metal) The sill piece your arm would rest on if the window was open and you had your arm out of it.
 
  #4  
Old 10-20-2017
JAshley3's Avatar
Member
Join Date: Jul 2017
Location: Lexington, SC
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Gotcha. On mine both of those pieces lift straight up, but not sure if that’s normal or not. I got 2 newer ones from the junkyard and were very easy to install.
 
  #5  
Old 10-20-2017
MaDMaXX's Avatar
Member
Thread Starter
Join Date: Jul 2017
Location: Oregon
Posts: 784
Likes: 0
Received 0 Likes on 0 Posts
Unclip and lift up? or..... I'm guessing not normal?
 
  #6  
Old 10-20-2017
MaDMaXX's Avatar
Member
Thread Starter
Join Date: Jul 2017
Location: Oregon
Posts: 784
Likes: 0
Received 0 Likes on 0 Posts
Alright so it seems to be called the "Door Weatherstrip" - Part 6L5Z-1021453-AA (drivers side (left))

Seems replaceable and recommended to remove the mirror first. I don't know any other details about replacement though.
 
  #7  
Old 10-20-2017
JAshley3's Avatar
Member
Join Date: Jul 2017
Location: Lexington, SC
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
I did not remove the mirror. Once the window was rolled down it just snapped upward to remove. There were no clips. To reinstall though, you will put the front end (towards mirror), in first, then push down on the back end of the trim, but it doesn't look like the mirror needs removed.

All this however, I can only speak on mine as long as nothing was modified or broken from the previous owner. It appeared quite simple though.
 
  #8  
Old 10-20-2017
MaDMaXX's Avatar
Member
Thread Starter
Join Date: Jul 2017
Location: Oregon
Posts: 784
Likes: 0
Received 0 Likes on 0 Posts
Hmm alright, could you see how it attached then if there were no clips?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Thesilentwizard
Exterior Semi-Tech
10
02-11-2015 06:38 PM
Hawklore
Exterior Semi-Tech
6
07-16-2011 05:15 PM
05Edge-04GT
General Ford Ranger Discussion
0
05-28-2011 08:50 AM
stiffy
Exterior Semi-Tech
10
08-02-2008 01:33 PM
mcpink
Exterior Semi-Tech
0
03-22-2008 07:44 AM



Quick Reply: Door/Window trim removal/replacement?



All times are GMT -6. The time now is 07:34 AM.