Fog Lights
 

For Christmas i got a front valance with fog light holes and some fog lights. I just gotta figure out how im going to mount them, then arent the exact size, close but not exact, so there is a little gap around it. I was thinking about putting mesh or black plastic to fill in the gap. I am also thinking about using some kinda L shaped metal bracket, rust resistant, to mount the lights. Sound Good? Any Suggestions? Thanks.

i just made an L bracket that bolted to the bumper brackets then i got stock ranger brackets..

im gunna try the L Shaped bracket thing, when you have yours like that what part of the bumper did you bolt the bracket to?

get under neither after you put the valance on and look up you will see a black support beams on the bumper behind it those...

Ditto>>>
 

I made my own brackets with some 1" flat stock, as my lights aren't original either.................
Attachment 210698

Good Luck!!!

I got a set of OEM Explorer fog lights from a JY for $5, had a sheet of SS laying behind the house from an old sandbox when I was a cut it up and made 2 brackets out of it. Bolted it up the factory bumper brackets, I thought it came out pretty good. Just throwing some ideas out there for ya. Good Luck!
Attachment 210696
Attachment 210697

thanks for you guys ideas.. i haven't had a chance to do anything with it so far because my family is in the process of moving, but as soon as we are settled then ill go for it.

http://memimage.cardomain.net/member...2_151_full.jpg

http://memimage.cardomain.net/member...173_2_full.jpg

http://memimage.cardomain.net/member...173_5_full.jpg

http://memimage.cardomain.net/member...173_4_full.jpg

^thats exactly what im going to do.

well the L bracket is what i used, i got my fogs mounted, wired, and working, and i love them. Ill post a pic or two later. thanks for your guy's suggestions and help.