So i want to do a conversion on my truck. I want to put this brush guard on along with my old bumper with the fog lights from the edge to my xlt that i have now.

brush guard

what do ya think?

 

Let me make sure i understand this. You used to own a edge and you still have the bumper. You now own a xlt and you want too but the edge bumper on it now and get the brush guard?

Sounds like a plan!!

 

stupid question, but can you post pics of the bumpers, and the exact models that they came off of (i crashed mine, and i need to know for the 21st, what the bumper they are replacing mine with, is coming off of. except i don't know that right now

 

No, i totaled the edge, But i want the edge front end valance with the fog light setup. i want to know if it will be hard to put it all together with the wireing. I have seen it done. want to know how hard it is. i know i should be more clear and everything when i first posted this. My only thing now is where to get the valance and how much will it be to paint it. here are the pics of my truck now and the edge is on the right that i totaled

 

i see only 1 truck...

 

look in my pictures on the RF site you can see my truck that i had there. Or look at the pic on ur Left where all m info is. sorry i know i said right before..

 

Yeh you can do it and the fog light wiring should be there IRC. You will just have to get the radio bezel with the fog light button... You might get lucky and find one in a junkyard(Good luck though) and paint cost is just going to depend on the shops around you. I know around here they want 44/hr. Try car-part.com to search for a bumper around your local junk yards...

 

IRC? okay i get confused is the valance have the fog lights of the bumper. i want the color match bottom with fog lights and crome top. then in time get a powerdome hood.

 

i have a bezel with the fog light switch but its also and 4wd one.


also i dont think that brush guard will work with out custom mounts it looks just like the one i have that i got of a taco

 

I heard if i have pigtails on the front of my truck now (pictures above 6 threads up) also check the fuse box under the hood im good to go, Now my question is what fuse am i looking for? Also what pigtails am i looking for?

 

Bryan, Here's Downey's thread on Fog lights he's got pic of the pigtails that your looking for as well as where the fuses and relay's should be

https://www.ranger-forums.com/forum2...need-help.html

 

Okay i found the pigtails under the truck. I went under the hood in the fuse box, i don't think i have a fuse for the fog lights(but if i don't, i can get one correct? so it can work). still need to look in the center dash console and see if the switch hookup is there.

 

im going to look in my dash this weekend, any clue of what to look for?

 

i would think it would be behind the radio bezel on your truck, and probably will have a plug roughly 1"x1" probably 5 wires on it, but this is purely speculation, as i have never seen the inside of a dash from a truck with your interior

 

i know it's in behind the bezil, ill hunt around i have the hardware laying around from another bezil i had(though don;t have it anymore), ill hunt around for it thanks for the info. ill let ya know my progress. Also, i heard you need slips for this conversion to put the bumper, valance and fog lights on once i get them from cerifit.com is that true?

 

slips?
you're going to have to paint the bumper and valence. they don't come pre painted i don't know if u know that maybe i missed it in the thread lol. that color paint (E4) is expensive too i have the same color

 

I ment Clips sorry, also im gettin a crome upper bumper and getting the lower one painted. my thing now is just looking for the wires for the switch before i order anything.