Painting Chrome
I want to paint both bumpers and my grille black to match my truck. Has anybody done this and had good results? How would I go about doing it?
|
take some 600 grit sand paper and sand the bumpers till they are dol and no shinny spots then primer it and then paint it. you can paint over anything with the right prep
Sand clean prime paint |
any special primer or cleaner?
|
If i was you i would just look for some painted bumpers. Like one's off of an edge.
|
Originally Posted by GT_hatchback
(Post 1265727)
any special primer or cleaner?
If so just get the primer from the auto parts store that is with the paint try not to mix brands. i always clean with Windex or some glass cleaner because it removes oils |
Originally Posted by rangerboy101
(Post 1265729)
If i was you i would just look for some painted bumpers. Like one's off of an edge.
I thought this site was about mods? Not discouraging people from DIY. |
Originally Posted by rangerboy101
(Post 1265729)
If i was you i would just look for some painted bumpers. Like one's off of an edge.
|
Originally Posted by GT_hatchback
(Post 1265746)
I would rather pay less than $50 for paint than a couple hundered bucks for two new bumpers
|
Originally Posted by Ciaran
(Post 1265732)
Quoted for failure.
I thought this site was about mods? Not discouraging people from DIY. |
its not hard to paint have you ever painted anything?
|
Originally Posted by Downey
(Post 1265753)
its not hard to paint have you ever painted anything?
|
Originally Posted by GT_hatchback
(Post 1266964)
yeah but Im just a little intimidated because its chrome....so just sand it down with 600 grit until no chrome is left, clean it,primer and put a couple coats on it?
|
^^^^ thats what i said earlier
|
if it get screwed up drive to my house and we can do your bumpers and make them look great
|
Originally Posted by Downey
(Post 1267261)
if it get screwed up drive to my house and we can do your bumpers and make them look great
ha ha Im going to hold you to it..... |
Im serious if you come out here i will do it for you have you seen the black on my truck its all spray paint
|
Originally Posted by Downey
(Post 1267762)
Im serious if you come out here i will do it for you have you seen the black on my truck its all spray paint
|
sounds good if it doesnt work out when ever you want to come out i will fix it.
what paint are you guna use? dupli color? |
You should use etching primer and then a coat of filler primer on top of that. And if there is any rust in the chrome or if the chrome is chipping anywhere then the paint will start flaking and you WILL have to remove every last bit of chrome to make the paint stick.
|
Originally Posted by Downey
(Post 1267781)
sounds good if it doesnt work out when ever you want to come out i will fix it.
what paint are you guna use? dupli color? |
wow i can tell you guys havent been near body shops or ever doing a restoration on a vehicle...
*IF* you want to proper bond to a chromed part you want to sand blast the part that is chrome its not so much removing the chrome you will some. but its etching it is the main reason.. Ryan said Etching primer which is correct then sand and sealer primer then sand some more wet sand to atleast 2000grit then paint.. if its a base coat clear about 2-5 coats will do then sand wet sand atleast to 2000 grit then start the polishing buffing process till its nice and shiney.. |
Originally Posted by GT_hatchback
(Post 1265727)
any special primer or cleaner?
Precleano for cleaning and prepping before all painting and primering.. removes contaminates and silicone so you dont get fish eyes Light LIGHT key word skim of bondo on any minor rough spots and or low spots.. |
Originally Posted by Downey
(Post 1267261)
if it get screwed up drive to my house and we can do your bumpers and make them look great
|
All times are GMT -6. The time now is 08:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands