my Front end conversion ideas
#1
my Front end conversion ideas
So i want to do a conversion on my truck. I want to put this brush guard on along with my old bumper with the fog lights from the edge to my xlt that i have now.
brush guard
what do ya think?
brush guard
what do ya think?
#2
#3
#4
No, i totaled the edge, But i want the edge front end valance with the fog light setup. i want to know if it will be hard to put it all together with the wireing. I have seen it done. want to know how hard it is. i know i should be more clear and everything when i first posted this. My only thing now is where to get the valance and how much will it be to paint it. here are the pics of my truck now and the edge is on the right that i totaled
#6
#7
Yeh you can do it and the fog light wiring should be there IRC. You will just have to get the radio bezel with the fog light button... You might get lucky and find one in a junkyard(Good luck though) and paint cost is just going to depend on the shops around you. I know around here they want 44/hr. Try car-part.com to search for a bumper around your local junk yards...
#8
#9
#10
#11
Bryan, Here's Downey's thread on Fog lights he's got pic of the pigtails that your looking for as well as where the fuses and relay's should be
https://www.ranger-forums.com/forum2...need-help.html
https://www.ranger-forums.com/forum2...need-help.html
#12
Okay i found the pigtails under the truck. I went under the hood in the fuse box, i don't think i have a fuse for the fog lights(but if i don't, i can get one correct? so it can work). still need to look in the center dash console and see if the switch hookup is there.
Last edited by bry11083; 12-20-2009 at 04:57 AM.
#14
#15
i know it's in behind the bezil, ill hunt around i have the hardware laying around from another bezil i had(though don;t have it anymore), ill hunt around for it thanks for the info. ill let ya know my progress. Also, i heard you need slips for this conversion to put the bumper, valance and fog lights on once i get them from cerifit.com is that true?
#16
i know it's in behind the bezil, ill hunt around i have the hardware laying around from another bezil i had(though don;t have it anymore), ill hunt around for it thanks for the info. ill let ya know my progress. Also, i heard you need slips for this conversion to put the bumper, valance and fog lights on once i get them from cerifit.com is that true?
you're going to have to paint the bumper and valence. they don't come pre painted i don't know if u know that maybe i missed it in the thread lol. that color paint (E4) is expensive too i have the same color
#17
Thread
Thread Starter
Forum
Replies
Last Post
01_Camaro_SS
Exterior Semi-Tech
7
12-20-2016 05:00 PM