CB problems
#1
CB problems
hopefully someone here is into this..
me and a buddy have been trying to set up our CBs lately but we're havin some problems
when i transmit he can hear me fine but when he transmits, its pretty fuzzy and cant understand anything.
we've been looking around the net lately and haven't really found anything.
would the problem be on my end or his end?
we used the SWR meter with my ants and result were 1.5-1.3s
his results were 1.5(channel 1) 2+(channel 20) 3+(channel 40)
is the 12v good to use to power them?
me and a buddy have been trying to set up our CBs lately but we're havin some problems
when i transmit he can hear me fine but when he transmits, its pretty fuzzy and cant understand anything.
we've been looking around the net lately and haven't really found anything.
would the problem be on my end or his end?
we used the SWR meter with my ants and result were 1.5-1.3s
his results were 1.5(channel 1) 2+(channel 20) 3+(channel 40)
is the 12v good to use to power them?
#3
#4
dual antennas need to be at least 8' apart. here is a good link for setting SWR
http://www.firestik.com/Tech_Docs/Setting_SWR.htm
http://www.firestik.com/Tech_Docs/Setting_SWR.htm
#5
dual antennas need to be at least 8' apart. here is a good link for setting SWR
http://www.firestik.com/Tech_Docs/Setting_SWR.htm
http://www.firestik.com/Tech_Docs/Setting_SWR.htm
where did u find they have to be 8' apart?
would that cause a receiving problem?
#10
ok guys i got some pics of my setup and can u take a look and see if this setup is ok. i have it wired to my fuse box and only 1 of the 2 antennas hooked to coax. i drove through st louis and can hear the truckers perfectly but my buddy is havin a hard time heearin me, i dont know if its my setup or his
im not sure how much of help these pics are, but any help would be good
the fuse box wire is ground but im not sure how well. im going to go try and find another place to do that. any ideas where a good place would be?
EDIT: Just did another test and worked fine
...who knows
im not sure how much of help these pics are, but any help would be good
the fuse box wire is ground but im not sure how well. im going to go try and find another place to do that. any ideas where a good place would be?
EDIT: Just did another test and worked fine
...who knows
Last edited by EliteMarine; 08-22-2008 at 02:57 PM.
Thread
Thread Starter
Forum
Replies
Last Post
JGod
General Ford Ranger Discussion
3
02-08-2014 06:35 AM
Zero
General Technical & Electrical
4
09-28-2004 10:35 AM