Need custom hood decals
#1
Need custom hood decals
As the title states, I need custom hood decals.
I had these ones that I had purchased from Jared Chase (A Gen-Edge member...ORIGINAL Gen-Edge) March 2004. If he's a member here or know him on another site, I need to get in contact with him again.
The decals turned black, cracked, and faded dull. I removed what was left of them, however you can still see where they were as it is a darker blue.
I had purchased a pair from another member somewhere ( I believe it was from Ranger-Forums...now gone with the wind) and they were not the same dimensions.
The key here is to have the EXACT same decals made. The only saving grace is that the original purchase from Jared included 3 decals, and I only used 2. I have an extra original decal off which I took all the dimensions from.
If there is anyone that can assist me with this, it would be greatly appreciated. I will also purchase a few of them as well.
Let me know.
* I checked out UNDERDOG's decal line, but the font is not even close....and he only has a select print.
DECAL SPECS:
Colour: Silver (Matches rest of logos)
Font: Edge Font
Text: 3.0L OHV
Dimensions:
* Decal Length - From the front edge of "3" to the back edge of "V" = 10-9/16"
* Decal Height - Text Height = 1-1/4"
3 = 1-1/16" Wide
. = 5/16" x 5/16"
0 = 1-1/2" Wide
L = 1-1/4" Wide
O = 1-1/2" Wide
H = 1 5/16" Wide
V = 1 10/16" Wide
Spacing between letters:
3
3/16"
.
3/16"
0
1/4"
L
11/16"
O
1/4"
H
3/16"
V
This needs to be exact.
I had these ones that I had purchased from Jared Chase (A Gen-Edge member...ORIGINAL Gen-Edge) March 2004. If he's a member here or know him on another site, I need to get in contact with him again.
The decals turned black, cracked, and faded dull. I removed what was left of them, however you can still see where they were as it is a darker blue.
I had purchased a pair from another member somewhere ( I believe it was from Ranger-Forums...now gone with the wind) and they were not the same dimensions.
The key here is to have the EXACT same decals made. The only saving grace is that the original purchase from Jared included 3 decals, and I only used 2. I have an extra original decal off which I took all the dimensions from.
If there is anyone that can assist me with this, it would be greatly appreciated. I will also purchase a few of them as well.
Let me know.
* I checked out UNDERDOG's decal line, but the font is not even close....and he only has a select print.
DECAL SPECS:
Colour: Silver (Matches rest of logos)
Font: Edge Font
Text: 3.0L OHV
Dimensions:
* Decal Length - From the front edge of "3" to the back edge of "V" = 10-9/16"
* Decal Height - Text Height = 1-1/4"
3 = 1-1/16" Wide
. = 5/16" x 5/16"
0 = 1-1/2" Wide
L = 1-1/4" Wide
O = 1-1/2" Wide
H = 1 5/16" Wide
V = 1 10/16" Wide
Spacing between letters:
3
3/16"
.
3/16"
0
1/4"
L
11/16"
O
1/4"
H
3/16"
V
This needs to be exact.
Thread
Thread Starter
Forum
Replies
Last Post
BigRedDog
Ranger Products, Company, & Member Reviews
9
03-16-2009 09:40 PM