Sounds like my friend, who knew this guy, that talked to my grandma, who bought a bicycle from my cousin working at sears. He had blocks on the front of his Geo Metro. One time he looked at them weird, and they fell off. THEY FELL THE ***** OFF!!!

Don't give us your "my friend" bullshnit. There is more than just the blocks that attach the axle up front, so it didn't "end up next to the rear axle". At least make a believable lie.

 

hahaha

say it with me...pwn3d.

I've never even heard of a front axle coming "off" due to blocks...I've heard of spring pearches and leafs snapping, stuff like that...but not anything to do w/ the blocks.

 

didnt you have the rear blocks on your 94 break?

 

Well they didnt break, they had a split that ran about half way up the block, but I didn't lose my rear end by "breaking hard" LOL. They didn't seperate and totally obliterate themselves. They were the cheap cast ones from Autozoo, they cracked the day after I put them on. I found them cracked because I'm **** about checking anything I modify for a while to make sure its okay. After I saw they had cracked they were removed two days later and I flipped the hangers.

 

Heres a tid bit of info. Blocks in the Front are Illegal in all 50 States. The Added braking forces and steering forces are what make front blocks so dangerous.

 

and this is why i stress straight panhards and draglinks.

Bent bar on top, gusseted replacement on the bottom.

 

What material is the top one made from? Obviously not strong enough material or thick enough to absorb much punishment without being gusseted?

 

that is a rubicon Express off the shelf part. That is their Extreme Duty panhard.

 

true that....even though the bottom bar is bent, it is gussetted (sp) to be in a straight line.....and gussetted in the places were it will bend under pressure....

 

then to those who are doing there own stuff and have a bent bar like that, take a little time to put a gusset in there

 

ding ding ding, we have a winner. Now go look at the picture of the bronco and look at how far bent his panhard is. look at the angles compared to that of the one above. and I dont want to hear how it was stock off another vehicle, thats great but a stock waggy doenst run that panhard at those angles. by placing it in the way it is it is directly putting force into the weak areas.

 

you know that some states it is illegal to run lift blocks on the front right?

and John, that is a Superduty, it is a Dana 60 front...

 

Yes, previously posted.

 

As I mentioned above lift blocks in the front are illegal in all states.

Edit: D9 beat be to it

 

People Just Like To Repeat Stuff Around Here.

 

Do we like to repeat stuff around here?

 

excuse the fuc* out of me.......i didn't see it when reading through the pages......kiss my ***.......

and it is NOT illegal in all 50 states.....

These are the states that it is illegal in:
- Michigan
- Tennessee

my source: http://www.semasan.com/images/pdf/33525.pdf

 

Bah, guys come on, it was an oversight, nothing to bash on or get mad about.

 

there are alot more states then two, Cause I know for a fact Virgina has a law against them and they arent listed in that list. so I wouldnt follow the list entirely.

 

i know it isn't agains the law in Indiana to have lift blocks in the front, they just can't be over 3" tall....

 

here we go again.. lol.. jk... but gotcha on the gusset thing.. will remember to do that.. lol

 

this is stupid. i never seen people argue this much. that is a stock bar off a waggy wee did'nt bend it to make it fit and it dosn't freakin matter the truck will never se the road its a mudd truck it goes on the trailer to mudd hole gets the crap beat out of it and sent back home if it breaks big deal load it up take it home.and i don't want to hear any more bout my blocks or if their illeagle 90% of my truck is probly illeagle, tires sticking out to far,tint to dark, wind sheild tinted, bumper height, it goes on so shut up about it.

 

go back to your Cheby boards.......

 

wow holy bashness batmen....anywho ryan...rob yall got some killer rigs...if i had my cam i would go take a pic of my solid axle in my heep but yea its in west palm dead as hell. rob ur 2fiddy is pimp ***** em all.....same as ur chebby, the b2, n the ranger. im surprised they dotn say any thing bout my axle in my heep lol. no solid axle here is "perfect" for anyone. so i look at it like this...everyone builds their truck like they want...if someone dont like it o well get over n keep ur mouth shut. ever heard of bitin ur toung? o wait yall goin to bash me cause i dont even own a ford to?

 

if you or anyone else doesn't want critism, then they shouldn't post it.......because there is ALWAYS going to think there is a better way of doing something.....