bed rail box modificatoin.
#1
Join Date: Aug 2008
Location: porterville, ca
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
bed rail box modificatoin.
i scored this box for free. plans started out to run the box with the bed liner but that changed. i cut a corner out before i made my final decision to pull the liner. when i did pull the liner i found there is 2 more inches of usable space on either side. this is one of those measure twice cut once moments. this is what i got as of now.
i took 4" out to fit down in the bed and welded it up.
i then scored this 18g diamond plate for free as well almost full 4x10 sheet it.
not the most prettiest welds but they will do
i welded up the bottom seem to help seal things up
this project has been going for the last few months. i try to work on it when i can. but there will be more to come.
shane
i took 4" out to fit down in the bed and welded it up.
i then scored this 18g diamond plate for free as well almost full 4x10 sheet it.
not the most prettiest welds but they will do
i welded up the bottom seem to help seal things up
this project has been going for the last few months. i try to work on it when i can. but there will be more to come.
shane
#2
#6
Join Date: Aug 2008
Location: porterville, ca
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
facepalm yes especially when i pulled the bed liner out of my truck.
i would like to get it powder coated but the one of the companies i went to quoted me 150 for the coat and 65 to blast it. so walmart spray paint it will be. im thinking to keep it white but im also considering black.
thanks for the compliments.
tomorrow i will be working on the box. finish grinding, welding and mounting the struts.
i would like to get it powder coated but the one of the companies i went to quoted me 150 for the coat and 65 to blast it. so walmart spray paint it will be. im thinking to keep it white but im also considering black.
thanks for the compliments.
tomorrow i will be working on the box. finish grinding, welding and mounting the struts.
#9
#12
#13
Join Date: Aug 2008
Location: porterville, ca
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
#15
^^ that a cool idea because i have been thinking of getting a bed cover of some sort. with the mounting that im thinking of i could mount it near the gate.
i found what im gonna use for mounting and locking the box in the bed. cloths line hooks fit perfect in the center of the cleats.
i found what im gonna use for mounting and locking the box in the bed. cloths line hooks fit perfect in the center of the cleats.
Nice idea !
#16
#17
Join Date: Aug 2008
Location: porterville, ca
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
#20
Join Date: Aug 2008
Location: porterville, ca
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
#25
Join Date: Aug 2008
Location: porterville, ca
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
TheBob
OLD - Interior, Exterior, Electrical, & Misc.
1
04-11-2012 02:55 PM
Tys 4x4 FTW
General Ford Ranger Discussion
14
03-25-2009 09:47 PM