Pic Of Front and Rear Bumper Design
 

If the pic didn't work try this linkBumper PDF File
Hopefully shuteja wll be making me these bumpers for me soon so I can replace the ones that are bent to hell.

Rear bumper is kinda plain. No backup lights or anything?

Front one looks cool though. I look forward to seeing a finished product! Especially with the lights in it!

I could be making them right now if I had a few measurements. Thank God for night work!!!!

looks like a good start now get on it :)

How bout some tow hooks for the rear or some lights and whatnot...

I know the back needs a few more things but I couldn't think of how I wanted them. The front is the bumper i need the most it is almost off the truck on one side. It looks like the previous owner used just the bumper for a removal and ripped the bolt through the metal.

PS Jeff I will print you out a copy with the dimensions on them. I turned that layer off for the forum to much clutter.

You should weld on some rings to put latching tow-hooks on each side of the front and rear. Be a good tow-point for recoveries.

..ummm yea how bout hooks like mine...

I like the design, they are going to look good.

weld on some mounts for a shackle/clevis/d-ring on each side instead of a tow hook...

thats actually what we are going to do. Jeff is going to take a piece of 1x4 stock and round the end that comes through the bumber and then drill a 1" hole in the center for the shackle to fit in. It was just easier to list it as a tok hook.

ya half my post is missing, sorry i had some more added. i didnt wanna come of flike a dick.

tractor supply has clevis cheap and are pretty stout...pics when its done!

Thats cool. There will definetly be pics posted Jeff (shuteja) won't let me get away without posting pics. He gave me crap the other day because I don't have anywhere on my site that says he made the custom built brackets for the lights in my F-150. Its ok though he is one of my best friends so he's a loud to bust my stones about it.