skidplate for 98-2000 4x4
havent looked into it but heres what i found on a google search today. sorry if its a repost.
http://www.millersfabrication.com/skidplate.html |
looks kinda flimsy, don't think it would take much of a hit
|
That's a pretty salty price too. You can build your own from 1/4" diamond plate that'd be hella tougher for half the price. I had one made for under $100 by an aircraft fab shop.
|
thats a rip off. watch ebay, use the term: ranger skid and ull hit one. i bought my skid plate for $65 shipped, and it came of an 00 ranger.
|
i've seen better prices on here for stock ones
|
i didnt plan on buying one or anything, just passing it on. ya that price seemed kinda steep to me as well but i have a ton of diamond plate at my grandpas that he got from a friend that ill build one from eventually
|
Was gonna say, I think you could just have a custom fab shop make up one for a lot cheaper then that. But it does look pretty clean.
|
I thought 98 and 99 xlt Rangers(4x4 off road packages) came with a factory stainless steel skid plate on the front, on the transfer case and fuel cell?My 99 came with them from the factory.
|
i built one like that just using stronger materials and it cost a fraction of the price.
|
Originally Posted by 4x4offroad99
I thought 98 and 99 xlt Rangers(4x4 off road packages) came with a factory stainless steel skid plate on the front? My 99 came with one from the factory.
|
Build you own or have somebody build it. Shoot my freaking rock sliders cost $350 and that is using .120 DOM. I can use a hilift to jack up half the truck, I tested them in my driveway unlike that flimsy $200 plate.
|
I built my own last year and it has taken some serious hits. I have had to pull it off a few times to hammer dents out of the diamond plate and even added another crossbrace.Mounts where my swaybar used to be and I welded mounting tabs to the frame at the front just below the bumper.I can remove it in about 5mins if I need to.
http://www.mustangmods.com/ims/u/743/8304/142488.jpg http://www.mustangmods.com/ims/u/743/8304/142490.jpg http://www.mustangmods.com/ims/u/743/8304/178222.jpg http://www.mustangmods.com/ims/u/743/8304/178220.jpg http://www.mustangmods.com/ims/u/743/8304/142755.jpg Action shot!After a hard day of wheelin. http://www.mustangmods.com/ims/u/743/9654/183499.jpg |
1 Attachment(s)
|
Matt forgot to add you must have engine host to lift it into place. lol
|
hahahaha
yea.. weights 50-60lbs i only had a BL at the time.. so i just used the floor jack to put it against the frame and even took some of the weight off the tires then welded it on its only been used once :( but i guess thats one radiator saved eh? haha |
All times are GMT -6. The time now is 11:04 AM. |
© 2024 MH Sub I, LLC dba Internet Brands