88 tbird motor swap
What all is needed to swap in a complete turbo'd engine from an 88 tbird into a 93 2.3 5 speed? I would like to reuse the wiring harness from the N/A 2.3 and I don't care about A/C. I am searching the different forums but figured I would ask as well.
Thanks |
got to swap wiring...and ecu...i think...keep searching theres complete write ups out there
|
I have the computer but was trying to decide if I could still use the wiring harness with the new ECM.
|
you can use the truck harness. it will need repinned.
you will need to either convert the harness over to run a dist./TFI or convert the turbo motor to run DIS, up to you. |
These will help you along too:
92/93 Ranger wireing diagram http://i177.photobucket.com/albums/w...9293Ranger.jpg Turbo computer pinouts http://i177.photobucket.com/albums/w...23TPinouts.jpg This *may* help. The pin outs are for a 94, the wiring should be very similar to the 93, but not 100% correct if memory serves me right. Sorry I don't have the pinouts listed for the 93, only for my 94. Luckily the top diagram lists the pin numbers with the function. http://i177.photobucket.com/albums/w...gerpinouts.jpg |
Thanks guys, I'm a little backed up with flight school and won't be doing anything for a few weeks. I'm sure I'll have more questions so get ready.
|
All times are GMT -6. The time now is 03:14 PM. |
© 2024 MH Sub I, LLC dba Internet Brands