Fuel System
#1
Fuel System
ok guys... i havent talked to much about it... but the 91 3.0 is getting turboed.. im collecting parts and doing installs little by little.... but heres my deal rite now..
i have my:
fuel cell (18 gallon aluminum)
Fuell pump (holley blue pump)
fuel preasure regulator (w/gauge)
so now i need to figure out my line set up
im going steel braided with an fittings.. im just trying to figure out line size and item location... im gunna throw a filter in there too but ill pick that up when im getting lines and fittings..
im gunna be running a .57 trim t3 turbo
and upgrading the injectors to supercoupe injectors (later)
so couple questions
what size lines should i use (feed/return)?
do i need steel braided on the return?
im planning on putting the fuel cell allll the way in the back so im figuring im gunna need 15-20 feet of line each way...
any help would be greatly apreciated thanks guys!
i have my:
fuel cell (18 gallon aluminum)
Fuell pump (holley blue pump)
fuel preasure regulator (w/gauge)
so now i need to figure out my line set up
im going steel braided with an fittings.. im just trying to figure out line size and item location... im gunna throw a filter in there too but ill pick that up when im getting lines and fittings..
im gunna be running a .57 trim t3 turbo
and upgrading the injectors to supercoupe injectors (later)
so couple questions
what size lines should i use (feed/return)?
do i need steel braided on the return?
im planning on putting the fuel cell allll the way in the back so im figuring im gunna need 15-20 feet of line each way...
any help would be greatly apreciated thanks guys!
#2
ok guys... i havent talked to much about it... but the 91 3.0 is getting turboed.. im collecting parts and doing installs little by little.... but heres my deal rite now..
i have my:
fuel cell (18 gallon aluminum)
Fuell pump (holley blue pump)
fuel preasure regulator (w/gauge)
so now i need to figure out my line set up
im going steel braided with an fittings.. im just trying to figure out line size and item location... im gunna throw a filter in there too but ill pick that up when im getting lines and fittings..
im gunna be running a .57 trim t3 turbo
and upgrading the injectors to supercoupe injectors (later)
so couple questions
what size lines should i use (feed/return)?
do i need steel braided on the return?
im planning on putting the fuel cell allll the way in the back so im figuring im gunna need 15-20 feet of line each way...
any help would be greatly apreciated thanks guys!
i have my:
fuel cell (18 gallon aluminum)
Fuell pump (holley blue pump)
fuel preasure regulator (w/gauge)
so now i need to figure out my line set up
im going steel braided with an fittings.. im just trying to figure out line size and item location... im gunna throw a filter in there too but ill pick that up when im getting lines and fittings..
im gunna be running a .57 trim t3 turbo
and upgrading the injectors to supercoupe injectors (later)
so couple questions
what size lines should i use (feed/return)?
do i need steel braided on the return?
im planning on putting the fuel cell allll the way in the back so im figuring im gunna need 15-20 feet of line each way...
any help would be greatly apreciated thanks guys!
you shouldnt need anything larger than 3/8' lines. the return line does not need to be steel braided, nor does the feed line, but its all personal preference.
#3
#4
i just built a 400hp 4.0sohc turbo setup and used 5/16 fuel line.
Thread
Thread Starter
Forum
Replies
Last Post
Want to Buy: Fuel line between fuel filter & fuel pump - TN
iplayloudly
OLD - Interior, Exterior, Electrical, & Misc.
7
05-02-2012 03:10 PM