Zabeard F150 Traction Bars!
 

After months of waiting on Ballistic Fab parts, Zach finally received the much anticipated items and sent me the traction bars that he fabricated for my truck.
I installed them today and so far it is a night and day difference. My F150 is running 3" rear blocks, 35" tires on 4.56 gears and a Detroit locker. I get a lot of axle/spring wrap as you can imagine. Even when I roll to a stop, the springs rock back and forth. After installing the traction bars, the ride is a HUGE improvement. Not only is the truck WAY more solid on acceleration, but even when I come to a stop and accelerate through a turn with the locker. The Detroit causes the rear end to bind, and with the 3" rear blocks the rear end developed a tendency to walk around on me. So far it has been rock solid with the traction bars. I took a (crappy) phone picture after installing them this afternoon.

Attachment 82591

They look great! Sounds like they work good too.

Looks good!

Im just happy to see you finally have them! Wow that took forever!

Wow that did take a while! Looks good though!

Looks awesome man. Might have to fabricate myself some now. It looks like the bars bolt into a bracket which bolts under the axle using the existing U-bolts?

Is the 3in rear block stock?

No, Brian added it

That's what I thought.

Yes. It seemed like the best way to go. There isn't a lot of room to weld on the axle tube and I didn't want to worry about bending the tube from the heat.



Yep. That is a ready lift 3" block to enhance the stance with the leveling kit and a load in the bed.