07 Ranger Overhead Console Wiring
#1
07 Ranger Overhead Console Wiring
Since I got a 2007 Ranger 4x4 and I wanted to install the overhead console on it, I figured I could post the wiring details on it since the wiring for the 2007 is different from the others.
1. Black (BK) - ground
2A. Console Yellow/Gray (YE/GY) 07 Ranger White/Blue- console electronics power
2B. Console Blue/Red (BL/RD) 07 Ranger Blue/White- console display dimmer input
3A. Console Green/Orange(GN/OR) - Map light power (since the 07 has different wiring I connected this one to my power lock wire which has 12v constantly)
3B. Console Black/Blue(BK/BL) 07 Ranger Black wire - Dome light power
4A. Lt. Blue/White (BL/WH) - Temp sensor
4B. Lt. Blue/Yellow (BL/YE) - Temp sensor
5. Console Gray/Black (GY/BK) 07 Ranger Purple/Orange- speed sensor (not used by some, but necessary)
1. Black (BK) - ground
2A. Console Yellow/Gray (YE/GY) 07 Ranger White/Blue- console electronics power
2B. Console Blue/Red (BL/RD) 07 Ranger Blue/White- console display dimmer input
3A. Console Green/Orange(GN/OR) - Map light power (since the 07 has different wiring I connected this one to my power lock wire which has 12v constantly)
3B. Console Black/Blue(BK/BL) 07 Ranger Black wire - Dome light power
4A. Lt. Blue/White (BL/WH) - Temp sensor
4B. Lt. Blue/Yellow (BL/YE) - Temp sensor
5. Console Gray/Black (GY/BK) 07 Ranger Purple/Orange- speed sensor (not used by some, but necessary)
Last edited by cormchar; 03-26-2008 at 12:47 PM.
#3
#9
Where is this black wire? I just installed my OHC and everything works but the dome light. I wired the BK/BU console wire to the GR/BU on the dome light, but I get nothing. The map lights work.
Thread
Thread Starter
Forum
Replies
Last Post
TheBearJeweler
OLD - Interior, Exterior, Electrical, & Misc.
19
06-12-2009 07:26 PM
THE H.P FREAK
Interior Semi-Tech
4
02-15-2009 09:29 AM
cormchar
General Technical & Electrical
2
04-01-2008 09:37 PM
Skittle1
General Ford Ranger Discussion
13
09-01-2006 01:26 PM