1988 2.3 cone filter setup
 

Any ideas how to install a cone filter setup on this?
https://cimg2.ibsrv.net/gimg/www.ran...3e070b5fc.jpeg

That is a Cold Air intake(CAI) as is, all fuel injected Rangers have CAI's

Current air filter has 200% flow, so it can get pretty dirty before engine performance is effected
Cone filter maybe 120%, so you will need to clean it often

You can put the cone filter inside current air box, build a tube extension

Remember if you can HEAR an air intake when you REV the engine you have turbulence, so less performance