Need a Mechanic/Shop
#1
Need a Mechanic/Shop
Can anyone recommend a good Ranger mechanic/shop in (or near) Florida do a new V8 conversion in my 1993 4.0L Ranger? Instead of going with a general local speed shop, I'd like to get someone who knows and appreciates Rangers and who already has a familiarity with the swap process particular to these vehicles.
#3
#4
here you go
https://www.dieselbombers.com/diesel...nger-swap.html
Diesel Swaps: What About A Kubota? Here's How It Can Be Done
you will have to swap in a GM 700R4 auto overdrive tranny for this adapter
they install lower transmission gearing which is better for diesels and fuel economy
https://kubotaswappers.myshopify.com/collections/all
https://www.dieselbombers.com/diesel...2203-swap.html
https://www.dieselbombers.com/diesel...nger-swap.html
Diesel Swaps: What About A Kubota? Here's How It Can Be Done
you will have to swap in a GM 700R4 auto overdrive tranny for this adapter
they install lower transmission gearing which is better for diesels and fuel economy
https://kubotaswappers.myshopify.com/collections/all
https://www.dieselbombers.com/diesel...2203-swap.html
#5
here you go
https://www.dieselbombers.com/diesel...nger-swap.html
Diesel Swaps: What About A Kubota? Here's How It Can Be Done
you will have to swap in a GM 700R4 auto overdrive tranny for this adapter
they install lower transmission gearing which is better for diesels and fuel economy
https://kubotaswappers.myshopify.com/collections/all
https://www.dieselbombers.com/diesel...2203-swap.html
https://www.dieselbombers.com/diesel...nger-swap.html
Diesel Swaps: What About A Kubota? Here's How It Can Be Done
you will have to swap in a GM 700R4 auto overdrive tranny for this adapter
they install lower transmission gearing which is better for diesels and fuel economy
https://kubotaswappers.myshopify.com/collections/all
https://www.dieselbombers.com/diesel...2203-swap.html
Awesome I will definitely have to do some reading up when I get some extra Time!
#6
one of those companies did offer a ford ranger transmission adapter , BUT! the diesel engines torque ended up grenading the manual transmission.
so they ended up just recommending the 700R4 tranny that were bolted behind the GM 6.2 and 6.5 litre diesel engines .
they can handle the torque output just fine .
basically you send them your ECM and PCM and wiring harness , and they remove all of the wiring that is not needed , and they re-program the ECM and PCM to just read from the senders that are still required
so they ended up just recommending the 700R4 tranny that were bolted behind the GM 6.2 and 6.5 litre diesel engines .
they can handle the torque output just fine .
basically you send them your ECM and PCM and wiring harness , and they remove all of the wiring that is not needed , and they re-program the ECM and PCM to just read from the senders that are still required
Thread
Thread Starter
Forum
Replies
Last Post
230RWHP TREMOR
Drivetrain Tech
4
09-09-2012 06:22 PM
dez10
General Technical & Electrical
7
02-16-2012 10:22 AM
Wulfonce
General Technical & Electrical
18
03-24-2009 10:04 PM