General Ford Ranger Discussion General discussion of the Ford Ranger that does not fit in any other sub-forum.
Sponsored by:
Sponsored by: DashLynx

2000 Ranger will not stay running

Thread Tools
 
Search this Thread
 
  #1  
Old 10-31-2017
jmccann1224's Avatar
Member
Thread Starter
Join Date: Oct 2017
Location: Santa Rosa California
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
2000 Ranger will not stay running

Hello,

I drove my truck home from work, and the next day when i tried to start it, it turns over and starts but only runs for about 2 seconds then shuts off. Ive tried multiple times and its still does this.

I checked if there was anything blocking the air to the throttle body, but its all clear. Someone suggested to me to replace the fuel filter, which i did and it still is not running. im not getting any codes. Maybe the fuel pump?
my truck is the 6 Cylinder 3.0L. any help would be great. I cant figure out if its the fuel or something else,

Thanks
 
  #2  
Old 11-01-2017
RonD's Avatar
RF Veteran
iTrader: (1)
Join Date: Jan 2014
Location: Vancouver, BC
Posts: 30,654
Received 2,820 Likes on 2,586 Posts
Welcome to the forum

First thing I have to ask...........................have you added any gasoline to the gas tank?
Don't care what gauge says, don't care if you KNOW there is gas in the tank, have you added a gallon or two of gasoline just to take that off the table
LOL, you'd be surprised


Open drivers door window door closed
Turn key on and listen for HUMMMM of fuel pump in the gas tank, it only runs for 2 seconds with key on
Repeat key OFF and then ON at least 4 times, listening each time, it should run each time.

Now try to start engine

If it still dosn't stay running then you will need a helper
Remove large air tube from intake manifold
Open throttle manually
Have helper crank engine while you spray gasoline or Quick start(ether) into the intake
After engine starts keep spraying in fuel to see if it stays running longer than before
If it doesn't then spark is being cut off by computer
If it does stay running then fuel is being cut off by computer

Assuming you can hear fuel pump working as it should then it could be CAM Sensor issue, I would expect a code for that

Look on the engine for a fuel pressure test port, they don't all have them, follow the fuel injector rail it should be on passenger side of engine on that metal tube(rail)
Looks like a tires air valve, because that is what it is, a schrader valve, may even still have the cap on it
Rent/get fuel pressure gauge IF you have the Test Port
Test pressure by turning key on and off
2000 Ranger should get up to 55psi fuel pressure
If pressure stays low then yes, time for new fuel pump
 

Last edited by RonD; 11-01-2017 at 11:52 AM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
blueranger06
2.9L & 3.0L V6 Tech
36
11-26-2011 10:59 PM
99Stranger
General Ford Ranger Discussion
1
09-14-2011 08:15 PM
TrndAssassin
DOHC - 2.3L Duratec / Mazda L Engines
13
05-31-2010 05:11 PM
angrytreeclimber
General Technical & Electrical
6
12-19-2009 01:39 PM
blissintampa
SOHC - 2.3L & 2.5L Lima Engines
5
04-26-2008 02:15 AM



Quick Reply: 2000 Ranger will not stay running



All times are GMT -6. The time now is 06:58 PM.