I'm in the process on doin the PA BL on my 02 right now and there one step thats got me. Ive already got the bed lifted and im ready to lift the cab except for this one thing. On step E on the Battery cables part where you remove the bracket and harness thats bolted to the block. I cant find that bracket. I know its gotta be right under my nose. If anyone can point me in a direction to look I'd really appreciate it.

 

crapo i dont have a 4.0L SOHC at work other wise i would snap a pic lol. maybe bill or evan or Zach B will hit this in a few min

 

If you look in from the drivers side wheel well right behind the A/C compressor there is a 13 mm bolt that you have to remove that goes into the block. There is a bracket there and it is kinda hard to see. Follow the battery cable down behind the A/C compressor and you should see it. I can get a pic when I get home if that doesnt help, I dont get home till 6:15 EST though.

 

Thanks for the quick response guys. I got if off. I Really appreciate it.

 

No Problem

 

Bill you coulda prolly left that on..i did after the other lifts i did and took it off it reached fine after...just gotta watch when you start lifting the cab..and i also found it easier to lift the drivers side first..dunno why but it worked out better..

 

i never even took mine off. musta missed that step.

 

alot of the stuff that i was supposed to unhook to lift..i never did..just kept it there..

like the one on the firewall for something..never took that off

 

If thats the case then it is stretched pretty good

 

not really..almost everything excpet for a couple grounds reach fine..they jsut do it to save there *** if something does go wrong lol