A/C High/Low Specs?
 

I was wondering if anyone has the specs for the high/low readings for the A/C on a ford ranger?

I have a 02 ford ranger with a 2.3L Duratech engine.

My static reading is 105 low, amd 105 high.

With motor running with A/C on high for about 15 minutes I get a reading of 35 on the low side, and 200 on the high side.

Any info would be helpful!

Thanks!

30 on the low side is about the high end of the spec. 30 psi roughly equals a freezing air temp discharge.

There are special thermometers to stick in the vents to check temps, you can cheat with one made for a fridge as long as it has the long rod to slide into the vent.