question about OHC
#2
you're gonna pay anywhere from $25 to $75 dollars. I got mine for $45 from a local pick and pull (junkyard) with everything i needed minus the mounting screws.
as far as the install, it took me roughly 4 hours from start to finish using John Griggs (n3elz) very detailed how-to on his cardomain.
It's a pretty easy installation if you have a moderate amount of mechanical inclination and some power tools.
I used :
a dremel
metal cutter bit for dremel
hammer
small chisel ( just to lengthen the holes for the clips )
wire strippers
barrel splices
snap splices
and some various other everyday handtools
as far as the install, it took me roughly 4 hours from start to finish using John Griggs (n3elz) very detailed how-to on his cardomain.
It's a pretty easy installation if you have a moderate amount of mechanical inclination and some power tools.
I used :
a dremel
metal cutter bit for dremel
hammer
small chisel ( just to lengthen the holes for the clips )
wire strippers
barrel splices
snap splices
and some various other everyday handtools
#3
#4
#5
http://cgi.ebay.com/ebaymotors/98-Fo...03659062QQrdZ1
LKQ will sell you just the console in many cases. I go to one of their yards and then track down the bracket, harness, and temp sensor. I have a bracket and harness available as of now, but I don't have a temp sensor. If you go ahead and get an OHC lacking these components, let me know and I'll get you a set of them.
LKQ will sell you just the console in many cases. I go to one of their yards and then track down the bracket, harness, and temp sensor. I have a bracket and harness available as of now, but I don't have a temp sensor. If you go ahead and get an OHC lacking these components, let me know and I'll get you a set of them.
#7
Originally Posted by Lord Of War
Were exactly do you mount the temp sensor. I have every thing done but that.
Thread
Thread Starter
Forum
Replies
Last Post
MugenCRX04
OLD - Interior, Exterior, Electrical, & Misc.
12
09-29-2009 03:18 PM