Today I picked up my JBA Headers from New Image Coatings, in Lino Lakes, MN. I had them sandblasted prepped and coated in the highest temp (Which is the black satin finish 2000deg) for the grand total of $135 out the door. I had another friend that had his done for $100 with regular cermachrome or the silver looking coating. They can also do the high polished ceramic chrome too. Mention my name and they should give you all the same deal. Or if there are members elsewhere that would like this done I can get you hooked up as well if you pay to have it shipped here and back.

These guys do a quality job.

BTW, what makes it a better deal is that the headers were used for two years so they had surface rust that had to be removed during the sandblasting, I am 100percent satisfied with these guys. The other coaters quoted me 150 per header for the same coating!

REMEMBER TO MENTION MY NAME IF YOU STOP IN

 

The top pict was taken by Bob before he shipped them to me, the last three are the product of NEW IMAGE COATINGS work. It cost a ton less to coat them with a better coating then buying them with the lower temp silver satin JBA finish available . http://www.stuffforyourranger.com/st...a5faf64b6f6b76