camper shell
#1
camper shell
I have this damn Snug Top on the back of my truck that I am very much trying to get off. I undid the clips that are supposed to hold it down, but I still can't get it off. It seems to be somewhat "glued" onto the bedliner.
Somebody with experience or any knowledge wanna help me?
Somebody with experience or any knowledge wanna help me?
#3
#4
#5
#7
Member
iTrader: (3)
Join Date: Jun 2005
Location: Ottawa, IL
Posts: 701
Likes: 0
Received 0 Likes
on
0 Posts
Depending on the heat the truck is in, and the quality of the weather stripping is, it may have got hot enough and released all the adhesive throughout the strip.
My old alumnium topper did that, I actually used a 2x4 strapped to a car jack to the roof of the topper and jacked it up. (not safest but it worked) Then once the back was seperated I stuck a little 1x1 on each side and pounded them down towards the cab until it let loose.
Good Luck.
My old alumnium topper did that, I actually used a 2x4 strapped to a car jack to the roof of the topper and jacked it up. (not safest but it worked) Then once the back was seperated I stuck a little 1x1 on each side and pounded them down towards the cab until it let loose.
Good Luck.
Thread
Thread Starter
Forum
Replies
Last Post
Sea-Bass
OLD - Interior, Exterior, Electrical, & Misc.
29
05-30-2009 10:31 PM