For the haters... - Page 3 - Ranger-Forums - The Ultimate Ford Ranger Resource


General Ford Ranger Discussion General discussion of the Ford Ranger that does not fit in any other sub-forum.

Reply
 
LinkBack Thread Tools Search this Thread
  #51  
Old 05-07-2008
LowMaz's Avatar
Member
Thread Starter
 
Join Date: Feb 2007
Location: Sterling/ Amherst, MA
Posts: 788
Quote:
Originally Posted by FordFever View Post
i have niteshaded tails too, i just wonder how every one does with them. I think leaving the reverse light unshaded draws attention away from the tinted tails, which is good. i like the look of dropped rangers.

yes that one clear light area makes a HUGE difference. If they see solid black tails, they are coming for ya around here!

when im back home and not at school, i barely have any issues ever. UMass police are actually state police, I think thats why they are so strict about the smallest things
Reply With Quote
  #52  
Old 05-07-2008
Mark98xlt's Avatar
Member
 
Join Date: Jun 2004
Location: Parma Ohio
Posts: 13
Quote:
Originally Posted by LowMaz View Post
this is an accord with a fart can... i really dont think my truck sounds like its from the fast and the furious lol

http://youtube.com/watch?v=sDCiIIRUCus
it does. all those mufflers sound the same, doesnt matter what engine they are on.

should of kept the flowmaster..

no one wants to see an import muffler on a minitruck..
Reply With Quote
  #53  
Old 05-07-2008
LowMaz's Avatar
Member
Thread Starter
 
Join Date: Feb 2007
Location: Sterling/ Amherst, MA
Posts: 788
I love how you speak for everyone in the entire world.

and also, I wanted to see it thats why I did it. I never told you to do it to your truck, I just wanted it on mine
Reply With Quote
  #54  
Old 05-07-2008
Mark98xlt's Avatar
Member
 
Join Date: Jun 2004
Location: Parma Ohio
Posts: 13
Quote:
Originally Posted by LowMaz View Post
I love how you speak for everyone in the entire world.

and also, I wanted to see it thats why I did it. I never told you to do it to your truck, I just wanted it on mine
your obviously new to the scene, go post that up on some minitruck forums and see what their replies will be.

Last edited by Mark98xlt; 05-07-2008 at 01:32 AM.
Reply With Quote
  #55  
Old 05-07-2008
Fx4wannabe01's Avatar
RF Veteran
iTrader: (23)
 
Join Date: May 2005
Location: Boring, Oregon
Posts: 21,721
There's a 4x4 03 ranger here in town....with one of those "ricer" muffs on it right below the rear bumper.




that's it....i'm done....opinion: it's stupid. Call me a hater. But it is your truck, and if you like it, so be it.

Little bro had a WAAG bar on his lowered 2wd ranger. He liked it. I liked it. Everybody hated it. but he liked it. Bottom line, if you like it, so be it. Screw everyone else.
Reply With Quote
  #56  
Old 05-07-2008
Mark98xlt's Avatar
Member
 
Join Date: Jun 2004
Location: Parma Ohio
Posts: 13
Quote:
Originally Posted by Fx4wannabe01 View Post
Little bro had a WAAG bar on his lowered 2wd ranger. He liked it. I liked it. Everybody hated it. but he liked it. Bottom line, if you like it, so be it. Screw everyone else.

I liked that wagg bar on his truck, hell I think everyone on rps liked it as well.
Reply With Quote
  #57  
Old 05-07-2008
LowMaz's Avatar
Member
Thread Starter
 
Join Date: Feb 2007
Location: Sterling/ Amherst, MA
Posts: 788
fx4... you got it right on. its mine and I like it. screw whoever doesnt like the customizations i do to my truck. its called customizing for a reason... ITS CUSTOM!

as for mark... you are just a waste of time/ life so im not going to even bother arguing with you
Reply With Quote
  #58  
Old 05-07-2008
Fx4wannabe01's Avatar
RF Veteran
iTrader: (23)
 
Join Date: May 2005
Location: Boring, Oregon
Posts: 21,721
Quote:
Originally Posted by Mark98xlt View Post
I liked that wagg bar on his truck, hell I think everyone on rps liked it as well.
HAHA....well....it's off now, and is going on my 4/5'd 2wd police interceptor 98-00 whenever i get a 4cyl 2wd danger.....lol.
Reply With Quote
  #59  
Old 05-07-2008
Roach2004's Avatar
RF Veteran
iTrader: (3)
 
Join Date: May 2005
Location: Houston, TX
Posts: 8,320
My opinion: Thats stupid lol Sorry I know everything on my truck is not liked by all. Best bet is just not to care what others think.
Reply With Quote
  #60  
Old 05-07-2008
Fx4wannabe01's Avatar
RF Veteran
iTrader: (23)
 
Join Date: May 2005
Location: Boring, Oregon
Posts: 21,721
Yea....Andy those headlamps suck! Ugly mo fo's.
Reply With Quote
  #61  
Old 05-07-2008
Mark98xlt's Avatar
Member
 
Join Date: Jun 2004
Location: Parma Ohio
Posts: 13
Quote:
Originally Posted by Fx4wannabe01 View Post
HAHA....well....it's off now, and is going on my 4/5'd 2wd police interceptor 98-00 whenever i get a 4cyl 2wd danger.....lol.
lol glad your dropping it correctly the first time 4/5 instead of wasting your time with any of the other drops.
Reply With Quote
  #62  
Old 05-07-2008
LowMaz's Avatar
Member
Thread Starter
 
Join Date: Feb 2007
Location: Sterling/ Amherst, MA
Posts: 788
......

Last edited by LowMaz; 05-07-2008 at 01:56 AM.
Reply With Quote
  #63  
Old 05-07-2008
Mark98xlt's Avatar
Member
 
Join Date: Jun 2004
Location: Parma Ohio
Posts: 13
Quote:
Originally Posted by LowMaz View Post
dude, how hard is it to shut the f**k up?!

anyone know how to block a POS user?
I didnt even say anything to you lol.
Reply With Quote
  #64  
Old 05-07-2008
thesoundmaster's Avatar
Member
 
Join Date: Mar 2007
Location: Centennial CO
Posts: 5
LowMaz, I decided to support you, thought it sounded decent, but your attitude towards Mark is out of control, so I pull my opinion, it looks like crap, sounds like crap, and ya know, you've inspired me...


... who wants to see a fart can on my truck on the trail???
Reply With Quote
  #65  
Old 05-07-2008
Mark98xlt's Avatar
Member
 
Join Date: Jun 2004
Location: Parma Ohio
Posts: 13
Quote:
Originally Posted by thesoundmaster View Post


... who wants to see a fart can on my truck on the trail???
Dude, lightning style with two of them exiting before the rear wheel on passenger side.
Reply With Quote
  #66  
Old 05-07-2008
thesoundmaster's Avatar
Member
 
Join Date: Mar 2007
Location: Centennial CO
Posts: 5
Quote:
Originally Posted by Mark98xlt View Post
Dude, lightning style with two of them exiting before the rear wheel on passenger side.
Actually I'm thinking of doing either a 3" Magnaflow catback with side exit through my bedside (as to not crush it on the trail) or a Flowmaster Super 40 with 2.5" outta it to a 3.5" tip out the side of the bed
Reply With Quote
  #67  
Old 05-07-2008
Mark98xlt's Avatar
Member
 
Join Date: Jun 2004
Location: Parma Ohio
Posts: 13
Just have them raise it up into the frame rails, thats how I had it done on my truck so I wouldnt catch it up on anything because it sits so low.

Id be worry about messing up my paint with exhuast coming out of it and the carbon/water exhuast leaves.
Reply With Quote
  #68  
Old 05-07-2008
LowMaz's Avatar
Member
Thread Starter
 
Join Date: Feb 2007
Location: Sterling/ Amherst, MA
Posts: 788
ok, i see how it is. im the bad guy here. ill take it.

mark, sorry for being an arrogant newbie to the scene. ill go find my own place. i respect your opinions, to each his own. the way you went about it, not really respecting that. you do what you want, Ill do what I want.


just sucks, i was gonna become a contributor at the end of the week when i got a few extra bucks. now im rethinking that decision
Reply With Quote
  #69  
Old 05-07-2008
thesoundmaster's Avatar
Member
 
Join Date: Mar 2007
Location: Centennial CO
Posts: 5
Quote:
Originally Posted by Mark98xlt View Post
Just have them raise it up into the frame rails, thats how I had it done on my truck so I wouldnt catch it up on anything because it sits so low.

Id be worry about messing up my paint with exhuast coming out of it and the carbon/water exhuast leaves.

I'm in the tall truck scene, so lowering it won't be in my plans.

I have a buddy who put a stainless steel plate around his when he did it

Name:  IMG_1261.jpg
Views: 3
Size:  119.4 KB
Reply With Quote
  #70  
Old 05-07-2008
Mark98xlt's Avatar
Member
 
Join Date: Jun 2004
Location: Parma Ohio
Posts: 13
Quote:
Originally Posted by LowMaz View Post
ok, i see how it is. im the bad guy here. ill take it.

mark, sorry for being an arrogant newbie to the scene. ill go find my own place. i respect your opinions, to each his own. the way you went about it, not really respecting that. you do what you want, Ill do what I want.


just sucks, i was gonna become a contributor at the end of the week when i got a few extra bucks. now im rethinking that decision

Honestly man what did you expect when you post a thread with the title "for the haters" I hardly thought my comments were as mean as the others..

I have nothing against you do what you want with your truck it is yours and your money I just think your ruining the clean look you had with that muffler and bringing attention to it thats not needed..

Ive been to shows with fellow ranger owners and minitruckers and usually theyll laugh at a truck when they see that or something else ricey done to it, not directly to the owner but to each other.

Not trying to ruin rf for you but honestly you brought all this un needed attention to yourself.
Reply With Quote
  #71  
Old 05-07-2008
LowMaz's Avatar
Member
Thread Starter
 
Join Date: Feb 2007
Location: Sterling/ Amherst, MA
Posts: 788
decision rethought. im still becoming a contributor because this site has been great to me and some of the people ive met have been really nice and helpful. id like to stay around and help other people when i can.

the internet is not a spot to fight or try to be tough. it makes you look like less of a man and you get no respect. i made myself look stupid and i have to live with that. on that note, im done with it all. sorry things had to go this way, but sometimes stuff happens. i realize i was immature and stupid, so think what you want about me.

ill still be around but mostly to help people with their questions and to tell people nice work when I like something they have done. if i dont like it, i wont say a thing because its not worth it
Reply With Quote
  #72  
Old 05-07-2008
Mark98xlt's Avatar
Member
 
Join Date: Jun 2004
Location: Parma Ohio
Posts: 13
Quote:
Originally Posted by thesoundmaster View Post
I'm in the tall truck scene, so lowering it won't be in my plans.

I have a buddy who put a stainless steel plate around his when he did it
I know your a lifted guy, i said raise it up even with the frame rails so you will have more clearance.
Reply With Quote
  #73  
Old 05-07-2008
LowMaz's Avatar
Member
Thread Starter
 
Join Date: Feb 2007
Location: Sterling/ Amherst, MA
Posts: 788
mark, i really have nothing against you either. but when some people said they hated it, they did so with one post. i know we went back and forth, that was stupid on both our accounts.

you didnt ruin RF for me, this place is awesome and id be lost without it. i just realized how I have to go about things here and not take things personal. I actually thank you for the reality check.

Ive been bugging out about school and some other personal issues and I guess they just messed with my head so bad that I snapped. Im gonna get my stuff straight and ill be more active when my heads clear
Reply With Quote
  #74  
Old 05-07-2008
Mark98xlt's Avatar
Member
 
Join Date: Jun 2004
Location: Parma Ohio
Posts: 13
Quote:
Originally Posted by LowMaz View Post
mark, i really have nothing against you either. but when some people said they hated it, they did so with one post. i know we went back and forth, that was stupid on both our accounts.

you didnt ruin RF for me, this place is awesome and id be lost without it. i just realized how I have to go about things here and not take things personal. I actually thank you for the reality check.

Ive been bugging out about school and some other personal issues and I guess they just messed with my head so bad that I snapped. Im gonna get my stuff straight and ill be more active when my heads clear
Its cool, I'll admit Im not the nicest at times I tried to do it in the nicest way but from your replies it was a tad hard to not be mean.

You can ask the members that have met me Im prob the nicest person youll ever meet, I just make jokes sometimes online or im to honest when I post, I tell the truth even if its harsh so dont take it personal.

Just be yourself and do what you like to enjoy yourself. Yes being custom is being different from the norm but sometimes doing something custom just turns out looking like crap in the end.
Reply With Quote
  #75  
Old 05-07-2008
LowMaz's Avatar
Member
Thread Starter
 
Join Date: Feb 2007
Location: Sterling/ Amherst, MA
Posts: 788
wanna hug it out? haha had to say it

but yea, for the "correct drop", i needa get the control arms now. how much those run ya?
Reply With Quote
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
6.0L diesel haters RazorsEDGE General Ford Discussion 15 08-11-2011 11:18 PM
For the haters!!!!! Downey Snapshots 52 05-08-2009 07:05 AM
Fx4wannabe's "Bring on the haters" aka Ver. 1.4(56k nonono) Fx4wannabe01 Snapshots 98 10-21-2008 04:31 AM
A thread just for you "Dirty Driveshaft Haters" Needforspeed3685 General Ford Ranger Discussion 10 09-03-2007 11:38 AM
to all the haters on my sas thread. pics inside. ryanrebel125 Fabrication & Tool Tech 127 06-17-2007 06:30 PM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -6. The time now is 06:53 PM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.