So I've put new plugs and wires on my 07 2.3l ranger and I'm still getting the misfire on cylinder 1. Idk what else to do guys. I HAVE to go to work in the morning. It won't cut off just is running bad.. plz help guys!!

 

I would do the easiest things first. Put an inline spark detector to see if you are getting spark. Then, swap injectors with another cylinder to see if the misfire follows.

 

What about the coil pack? Could that be the next most likely??

 

Could be, but check for spark before throwing more parts at it. Coils are cheap, but still.

 

Was a bad coil pack fixed her right up!!

 

Good news.