instrument panel lights
 

I am tring to find out how to change one of the instrument panel bulbs if any one can help me that would be great.

Like the speedo and stuff? If so ill warn you its fun :)

theres a how-to on it, not too bad. what year?

it can be pretty fun in the 04+ cluster. i had a hell of a time with the bulb holder

and if you do pull the dash replace all of the bulbs while your in there

My ranger is a 2003 and it is the tach bulb

Take the dash apart, there should be a write up on here somewhere. On how to do that. But like they said before change them all so yos wont have to do it again.

I'm having similar problem on two of the bulbs in my instrument panel. You need to take that part of the dash apart per step by step instructions in a blog in this forum. The bulb sockets on the circuit board become easily accessible once you've taken that part of the dash apart!

I replaced all the dash ilumination bulbs but forgot about the warning and indicator bulbs. A few months later the cruise control indicator light stopped working. I will just wait until another light goes out before I go back in there.
So, it is a good idea to replace 'ALL' the bulbs, not just the dash illumination bulbs.

Did mine also just the 194's though