Light Tabs on my tow hooks
#1
Light Tabs on my tow hooks
I want to make some light tabs to mount on the top bolt of my tow hooks, since I don't use my tow hooks anyways. Does anyone know what size nut I need so I can bolt my tabs to the upper bolt on the tow hooks? I think its about 1/2" but I'm not sure. Maybe metric?
#3
Actually...it was me but on Cory's truck. lol...
anyway...i believe they were 14mm? possibly 12mm. thread pitch? IDK. You'd be better off pulling a bolt like I did, going to the hardware store and getting a longer one, a spacer nut, and a new nut. The tabs I used are the same dimentions as the ones Wayne @ Underdog sells...2" x 6". If you made the brackets longer, there'd be no need for the spacer nut. We used what we had w/o having gas...i originally made nice and tight fitting tabs, BUT 06+ trucks use bumper covers and doesn't use the existing bolts like 05 and older trucks use to mount their tabs..
anyway...i believe they were 14mm? possibly 12mm. thread pitch? IDK. You'd be better off pulling a bolt like I did, going to the hardware store and getting a longer one, a spacer nut, and a new nut. The tabs I used are the same dimentions as the ones Wayne @ Underdog sells...2" x 6". If you made the brackets longer, there'd be no need for the spacer nut. We used what we had w/o having gas...i originally made nice and tight fitting tabs, BUT 06+ trucks use bumper covers and doesn't use the existing bolts like 05 and older trucks use to mount their tabs..
Thread
Thread Starter
Forum
Replies
Last Post
annguyen1981
OLD - Interior, Exterior, Electrical, & Misc.
28
12-25-2011 06:42 PM
Sonic04Edge
General Ford Ranger Discussion
18
12-14-2005 12:42 PM