needing advice on rear bumper.help plz
#1
07-27-2014
#2
07-28-2014
Not sure of the years but Ranger didn't change much in the rear.
I have a '95 bed on my '03 chassis, the bumper came from a MA Ranger Owner, not sure of the year of the bumper, sorry.
You need a Steppie or Flair side Bumper, the style side will not fit, wrong cut outs, width might work.
Only problem, most of the OEM Bumpers on Steppies have rotted out before ever making it to the JY.
If you are interested in an aftermarket Rear Steppie Bumper, check out my rear bumper, made by Custom 4x4 Fabrication, in OK. Mike, the owner, does GREAT work and has a design for a rear Step side bumper.
https://www.ranger-forums.com/fabric...x4-fab-136698/
I have a '95 bed on my '03 chassis, the bumper came from a MA Ranger Owner, not sure of the year of the bumper, sorry.
You need a Steppie or Flair side Bumper, the style side will not fit, wrong cut outs, width might work.
Only problem, most of the OEM Bumpers on Steppies have rotted out before ever making it to the JY.
If you are interested in an aftermarket Rear Steppie Bumper, check out my rear bumper, made by Custom 4x4 Fabrication, in OK. Mike, the owner, does GREAT work and has a design for a rear Step side bumper.
https://www.ranger-forums.com/fabric...x4-fab-136698/
#3
07-28-2014
Not sure of the years but Ranger didn't change much in the rear.
I have a '95 bed on my '03 chassis, the bumper came from a MA Ranger Owner, not sure of the year of the bumper, sorry.
You need a Steppie or Flair side Bumper, the style side will not fit, wrong cut outs, width might work.
Only problem, most of the OEM Bumpers on Steppies have rotted out before ever making it to the JY.
If you are interested in an aftermarket Rear Steppie Bumper, check out my rear bumper, made by Custom 4x4 Fabrication, in OK. Mike, the owner, does GREAT work and has a design for a rear Step side bumper.
https://www.ranger-forums.com/fabric...x4-fab-136698/
I have a '95 bed on my '03 chassis, the bumper came from a MA Ranger Owner, not sure of the year of the bumper, sorry.
You need a Steppie or Flair side Bumper, the style side will not fit, wrong cut outs, width might work.
Only problem, most of the OEM Bumpers on Steppies have rotted out before ever making it to the JY.
If you are interested in an aftermarket Rear Steppie Bumper, check out my rear bumper, made by Custom 4x4 Fabrication, in OK. Mike, the owner, does GREAT work and has a design for a rear Step side bumper.
https://www.ranger-forums.com/fabric...x4-fab-136698/
#4
07-29-2014
#6
08-23-2014
I just replaced mine on my 99 xlt. I also have the splash sides.I was in desperate need to replace it and was unable to find anything with the splash sides, so I just took a step bumper off a 98, had to trim it some,but it fits...not as snug as the original. I refused to pay over 200.00 for one from ford, cost me 45.00
Last edited by jerseyman32; 08-23-2014 at 02:31 PM. Reason: answered my own post
Thread
Thread Starter
Forum
Replies
Last Post
BlackRanger04
OLD - Interior, Exterior, Electrical, & Misc.
10
12-11-2010 05:26 PM
