Lifted B2500 - Need some help
#1
Lifted B2500 - Need some help
So about a month ago, i lifted my B2500, and we ordered upper control arms to compensate for the new lift. When the company sent them, they sent ones to an expedition (not even close to a ranger's). Anyone know what i should do? it cambered the tires and had to get new ones today, probably wont drive until i can get upper control arms for it. Anyone know if itll accept ones from a ford ranger, also would i need extended arms, it was a 3 in lift by the way. thanks for anyone who can help :D
#3
Ford Ranger arms will work since the B2300, B2500, B3000, and B4000 all use the same suspension and drivetrain parts as the Ranger.
If you used 3" lift coils, or spacers, or any combination of the two, you will need aftermarket control arms because the stock ones will hit the frame.
If you used 3" lift coils, or spacers, or any combination of the two, you will need aftermarket control arms because the stock ones will hit the frame.
Thread
Thread Starter
Forum
Replies
Last Post
cmd
General Technical & Electrical
2
06-28-2016 09:23 PM